ITR Parts for B16A

[Petronas]

What engine parts from the B18C7 could be used for a stock B16A?
Whole head? Cams? Cam gears?

[barefootbonzai]

yes you can use the entire head.

you can pretty much use everything from the engine except for crank and rods.

[B16bcivic]

All B-series parts will bolt and fit onto each other. Cranks and rods can still be used if you bore out your bottom end to the fitment of its sixze.

[Petronas]

thanks for the answers guy. =D

[ZeForce]

All B-series parts will bolt and fit onto each other. Cranks and rods can still be used if you bore out your bottom end to the fitment of its sixze.

The B16a deck is shorter than all the other B series blocks, if you tried to use the ITR rotating assembly (crank, rods and pistons) the top of the piston would actually stick out of the sleeve.

[Benson]

The B16a deck is shorter than all the other B series blocks, if you tried to use the ITR rotating assembly (crank, rods and pistons) the top of the piston would actually stick out of the sleeve.

FUN FUN

[barefootbonzai]

hahahaha, some funny stuff.

[sugarfree]

yes you can use the entire head.

you can pretty much use everything from the engine except for crank and rods.

what will this makes compared to stock b16a head??? does it makes compression lower (i think so).... but i know that at top end, it will have some sort of itr's characteristic....

am i right?

[SPEEDCORE]

There is no change in CR using the ITR head in this scenario.

[robbo_is_mad]

will there much difference in power if i use b18c type r cams in a b16a2 motor and would there be any difference if i was to get the b18c type r ecu and to be put in mine? my mate is giving them to mee becoz he put toda cams in his type r...