em1/ej8 times

[hondavti25]

hey guys havnt seen much ej8/ or em1 times wouldnt mind knowing what the coupes can do :) post some times up i dont have any on mine..

[EG5[KRT]]

go for a run and see mate :D

[thebob]

I believe justins old White K20 Coupe ran 13.1 or somewhere around that. Im pretty sure it ran a 61 around QR aswell.

[BlitZ]

mine does WSID - 14.3

Stock with IHE should be good for a flat 15 or thereabouts

[dupac->]

ive seen afew forumers em1 get around 15.8's to 16's i dunoo how well the drivers are.. but yeh.

lol.

b16a in urs blitz? nice time

i ran a 14.9 in my ek4. but still room for abit more improvement lol

[_FeRiO_]

First time out in my EM1
14.98 with I/H/E

[rawr]

I doubt a b16a can hit 14.3 in a 1200kg car

i think hes got a b18c7 in it

Considering EM1's are the same weight as ek4's you'd be looking at high 14s to high 15s depending on the driver ( with just basic I/H/E and possibly stripped)

[|N|]

i m guessing EK sedans are about the same weight as EM1??

i ran mine 15.60

shit time i know... but im a noob

[misteR_bilzz]

i think sedans might be a little heavier than the em1 cause of the extra doors and trims. =/ just a thought.

[BlitZ]

i dont think the em1 is the same weight as the ek4. on paper its 14kg heavier.. i find that hard to believe..

[BlitZ]

I doubt a b16a can hit 14.3 in a 1200kg car

i think hes got a b18c7 in it

Considering EM1's are the same weight as ek4's you'd be looking at high 14s to high 15s depending on the driver ( with just basic I/H/E and possibly stripped)



I think barefoot got around that time with B16a.. even std from memory


...

[dupac->]

lol.. my car was semi stripped but with a heavy driver :(

driver weight reduction is needed..

[vtec-dr]

depends if ur talkin circuit or drag. got a 1:52:436 around winton race track in my EM1, but not drag cos car is now ride off

[DNYALL]

Winton - 1:50.5 around winton long course.

Was my first time there, on street tyres and with a broken rear sub-frame(found that out after the day :() My fastest lap was in my last session.

[DNYALL]

My second time at Winton i got a 1:44.2 on the long course in 37 degrees...

Changes from the last time I was there were: Advan AO48 semi's, ITR b18c conversion, a fixed rear sub frame, stripped rear section, hasport mounts, ITR brake master cylinder, Motul high temp brake fluid, toda headers(replaced the 5zigen)

[thebob]

Barefoot ran high 13 i think? But im pretty sure that was with a B18.

I got a 63.1 QR and a 14.3 1/4

[fatboyz39]

barefoot done 13.4 or something.