EFI Conversion

[sik-vic]

Just want to know what some peoples opinions regarding what way to go converting my ED carb to efi. Surge or no surge that is the question...
The car may do a bit of track work once the suspension side of things are taken care of.

[Edgeauto]

easiest way is just to use a ED crx tank.

[sik-vic]

easiest way is just to use a ED crx tank.

I cant find one in Adelaide mate, so whats the best way WITHOUT a CRX tank? :o

[AKmotorworks]

If it might see track, get one welded up, with the tank sumped for a bosch 040 or 044 pump. Feed lines run in ss braided for feed and return, you can do a few tricks so as to not have to run a purge solenoid, but ur carby will also have a purge u can reuse on the welded tank.

easy job

[sik-vic]

Thanks for the advice, so your both basicly saying I have to have baffles in the tank, otherwise run a lift/main pump and surge, caus i did that with my RX7, I dont think that had baffles in the tank...

[fatboyz39]

Run an external fuel pump.

[sik-vic]

Run an external fuel pump.

Yea cool thats what i'll do