STR8E180
09-02-2008, 11:57 PM
all parts for my GTR build should be here the coming week so the GTR shouldnt be to far from finishing
i would thank every one who has helped me build this car
Daniel Wiseman (drift007)
Power FC D jetro + sensors & harness
SARD 800cc injectors
Blitz ID3 boost controler
RMS motorparts
HKS step1 camshafts 264/264
HKS adjustable camgears
CJ Motor Accessories
2 X greddy blow of valves
eugene (mxfly)
cusco coilovers with swift springs
HyperGear TurboChargers
X force cat back exhaust system,
RACESPEC
hicas lock bar
ISC-Performance
CR KAI 18 X 9.5 +12 BRONZE
Defi style boost gauge
RedTune
bosch 044 fuel pump
Surge tank
TN
SARD fuel reg
JustJap
90 Degree silicone bend for turbo
Defi-Style 3 Gauge Din Dash
Hi Octane
Gizzmo shift light
slippery sliders
Greddy remote control
Rocket Industries
115mm intercooler core
Custom Fabrication
Garrett T04z Dual Ball Bearing turbo (rated at 750hp)
ATPturbo in-house casted divided exhaust housing (twin scroll/spit pulse) T4 flange .70
TiAL 44mm external wastegate
custom steampipe Manifold to suit divided exhaust housing
screamer pipe
dump pipe + front pipe
intercooler pipng
intake pipe
custom airbox
advice
Power Tune Australia powertune.com.au
dyno tuning & advice
Nissansilvia.com
would also like to thank anyone who has helped me out with advice u guys know who u are
there are so many parts which have gone into this car so if i have forgotten anyone im sorry
once again thanks to every one who has helped in anyway in the building of this car
thread will be updated on the progress of the build :)
here are the only 2 decent pictures i have
http://img.photobucket.com/albums/v482/str8e180/2-1-1.jpg http://img.photobucket.com/albums/v482/str8e180/7-1.jpg
i would thank every one who has helped me build this car
Daniel Wiseman (drift007)
Power FC D jetro + sensors & harness
SARD 800cc injectors
Blitz ID3 boost controler
RMS motorparts
HKS step1 camshafts 264/264
HKS adjustable camgears
CJ Motor Accessories
2 X greddy blow of valves
eugene (mxfly)
cusco coilovers with swift springs
HyperGear TurboChargers
X force cat back exhaust system,
RACESPEC
hicas lock bar
ISC-Performance
CR KAI 18 X 9.5 +12 BRONZE
Defi style boost gauge
RedTune
bosch 044 fuel pump
Surge tank
TN
SARD fuel reg
JustJap
90 Degree silicone bend for turbo
Defi-Style 3 Gauge Din Dash
Hi Octane
Gizzmo shift light
slippery sliders
Greddy remote control
Rocket Industries
115mm intercooler core
Custom Fabrication
Garrett T04z Dual Ball Bearing turbo (rated at 750hp)
ATPturbo in-house casted divided exhaust housing (twin scroll/spit pulse) T4 flange .70
TiAL 44mm external wastegate
custom steampipe Manifold to suit divided exhaust housing
screamer pipe
dump pipe + front pipe
intercooler pipng
intake pipe
custom airbox
advice
Power Tune Australia powertune.com.au
dyno tuning & advice
Nissansilvia.com
would also like to thank anyone who has helped me out with advice u guys know who u are
there are so many parts which have gone into this car so if i have forgotten anyone im sorry
once again thanks to every one who has helped in anyway in the building of this car
thread will be updated on the progress of the build :)
here are the only 2 decent pictures i have
http://img.photobucket.com/albums/v482/str8e180/2-1-1.jpg http://img.photobucket.com/albums/v482/str8e180/7-1.jpg