View Full Version : IM Gaskets.
xtat1k
12-02-2008, 01:22 AM
Wondering if skunk2 IM and stock gaskets are the same for dc2 and which ones do i need, and does anyone know where to get em from located in sydney south west. Thanks. :D
dsp26
12-02-2008, 07:36 AM
Wondering if skunk2 IM and stock gaskets are the same for dc2 and which ones do i need, and does anyone know where to get em from located in sydney south west. Thanks. :D
B18c7/b16 are the same... vtir b18c2 is different...
***EDIT***
B18B/A is different also....
xtat1k
12-02-2008, 12:15 PM
B18c7/b16 are the same... vtir b18c2 is different...
***EDIT***
B18B/A is different also....
i knew that, i just needed to know which gaskets ill need if i change my intake manifold.
dsp26
12-02-2008, 01:13 PM
i knew that, i just needed to know which gaskets ill need if i change my intake manifold.
oh sorry thought you were after info on those coolant spacer gaskets...
if your transfering everything over from the oem setup to a skunk2 manifold, you may as well change all of them... they will very likely rip as you pry them off...
duno the part numbers as i re-used mine but:
- Runners/Head
- TB
- FITV or IACV.. can't remember which.... the one attached to the plenum between plenum/firewall...
xtat1k
12-02-2008, 01:18 PM
Thanks man, can anyone else confirm this.
I was thinking of re'using but i might buy it just incase it rips and then ill be screwed on the spot. do you know where i could get these from?
dsp26
12-02-2008, 01:21 PM
worse comes to worse, trace yours over the cork ones supercheap sell.. otherwise goto Repco/Autopro... my local branches have to order these items....
Otherwise the Honda Spare parts department at Penrith just give em a buzz (i'm assuming your from Syd)
xtat1k
12-02-2008, 01:24 PM
Yeah, cabramatta area. just wondering if any shops sell it so i dont have to go through the hassle of tracing it and stuff.
dsp26
12-02-2008, 01:26 PM
Honda Spare parts will definitely have them... but i'd call them in advance just in case they need to order it or transfer from another branch, etc...
Tu88y
12-02-2008, 07:32 PM
try mekong
xtat1k
12-02-2008, 07:39 PM
yeah that was the first place that came to my mind. will check them out tomorrow.
yes u use the same IM gasket as wat u have on ur car now...
Im assuming ur engine is a b18c2 ??
if so .. p72 oem gasket .. abt $10-15 from honda
xtat1k
13-02-2008, 02:58 AM
sweet, thanks for that.
xtat1k
13-02-2008, 10:47 PM
thanks guys for all the responses !
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.