Someone PLEASE HELP ME!!!!

[ICANDY]

Hey guys,
I need some help AGAIN...

could someone please give me a tutorial on how to fit white dials into the dash of my '93 eg civic 4dr...

Thanks heaps :) :)

[BlacKEGPedroew]

I did mine the other day,

1)Take out Hazard lights switch
2)Undo screw behind there
3)Take out two screws in top of cluster (there is only 3 screws not 4 as you may have read)
4)useing a flat head screwy pry out clips in between bottom of air vents and your black shroud.
There are two on the left vents and one on the right
5)Once these are out the black plastic shroud should slide out
6)then undo screws to cluster
7)Slide it out and take out plug/s
8)Take of plastic covering using the 4 clips
9)Undo screws on standard dials
10)Slide new dials on over existing dials
11)Run your wiring and replace dash

This will work if your dash looks like this....
hows the photoshop work..

[wynode]

Spot on!

Just be careful when you bend the cluster surround to undo the clips because once the plastic is bent, you'll have a small gap.

Take your time with it, that's the key!

PS: And don't snap your speedo needle

[mytoycivic]

how would i do this for my ED anyone????????

[civic__dd]

Im also about to do this for an ek. I have retrimed a dash before and remember seeing the back of it all but downt wish to remove the whole dash to fit the kit:)

[ICANDY]

thanks heaps guys,

much appreciated...