Moya
25-02-2008, 11:37 AM
Just recently I had Teg DC2 rear brakes fitted on my EG. Wanted to get rid of the dodgy drums.
Since then, there's a very loud (specially at highway) bearing/grinding sound coming from the rear left wheel.
I'm not sure what is involved with the swap (handbrake cable, Hub assemblies, Brake lines??) so I'm not sure if the donar car had the problem, or just a minor error when fitting (or maybe lazyness? didn't re-oil hub bearing?).
At 10-50KM/hr you can hear it, but at 80+ it gets really loud almost like a loud droning canon exhaust. It happens at full throttle or 0 throttle, also happens at all times (straight line, braking, cornering).
Any thoughts on what it could be?
Thanks
Since then, there's a very loud (specially at highway) bearing/grinding sound coming from the rear left wheel.
I'm not sure what is involved with the swap (handbrake cable, Hub assemblies, Brake lines??) so I'm not sure if the donar car had the problem, or just a minor error when fitting (or maybe lazyness? didn't re-oil hub bearing?).
At 10-50KM/hr you can hear it, but at 80+ it gets really loud almost like a loud droning canon exhaust. It happens at full throttle or 0 throttle, also happens at all times (straight line, braking, cornering).
Any thoughts on what it could be?
Thanks