View Full Version : Type S K20A Into my DC2 VTIR!
circuit_DC5
27-02-2008, 09:55 AM
Hey guys,
i just auction'd a type s from auctions and need some help doing a k20 swap into my DC2 VTIR...
i need to know..
- what do i need for the swap? ie. engine mounts, fuel rail?, etc????
- do i need to get it engineered?
- Do i need to modify anything?
- and so on.. basically need to know everything abt the swap as im very excited to whack it in... im doing this at home.. =)
much help would be great..
thanks :p
vinnY
27-02-2008, 09:58 AM
http://www.k20a.org/ ?
fatboyz39
27-02-2008, 10:09 AM
- Mounts (hasport, hybrid, innovative) ranging from 500-800
- Axles $300-$500
-Wiring conversion harness $350
-MOdify your stock wiring loom since its a k20 type S $200? A must if want to run K-PRO *optional
-K PRO ECU $1300 *optional
-Fuel system $500-$700
-Headers from $450-$1500
-Intake $200
-Karcept shifter $200
think there is more to it, just can't remember.
K20 type S gearbox doesn't run VSS. There's different ways to make the gearbox work. Either change the casing and add the speedo driver and etc OR run a Kpro ECU and change the signal outputs.
circuit_DC5
27-02-2008, 12:24 PM
- Mounts (hasport, hybrid, innovative) ranging from 500-800
- Axles $300-$500
-Wiring conversion harness $350
-MOdify your stock wiring loom since its a k20 type S $200? A must if want to run K-PRO *optional
-K PRO ECU $1300 *optional
-Fuel system $500-$700
-Headers from $450-$1500
-Intake $200
-Karcept shifter $200
think there is more to it, just can't remember.
K20 type S gearbox doesn't run VSS. There's different ways to make the gearbox work. Either change the casing and add the speedo driver and etc OR run a Kpro ECU and change the signal outputs.
i see, quite a few stuff.. but it all fits in my budget =)
thanks man,
time to purchase goodies :D
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.