Eg Angel Eyes Projectors Install Need Help!!!

[kairi_k]

Ey guys, i have installed the one peice angel eye projectors...the halos and indicators work fine, as does the 2nd light..however i cant work the main projector lights? can someone please help?...heard it was because the stock globes are h4 (hi and low beam in one globe) and the projectors are now h1 (two globes)..how do i make them work?

cheers

[nick_sixx]

the only way i can think of (personally i cbf) is run a wire from the high beam bulb, through a grommet in the firewall, take off the plastic casing around the steering wheel boss, and connect it to the switch on your high beam setting, or, as somebody else will suggest im sure (but i wouldnt know how) is connect it to a coil somewhere in the engine bay

[destrukshn]

RUN a relay harness.

[kairi_k]

Thats the info i aquired from another source...but how do i run a relay harness dude?

cheers

[OMG.JAI xD]

the main projector lights should have the the same plug as the oem headlight.
only modification you need is for the halos.
unplug the socket and see that the pins havent collapsed in.
happend to mine, and thought it snapped. it just basically got pushed in.

pull it out with long nose or long nails (lol-.-") and re connect carefully ..

bt jst rememba tht normal beam doesnt come on if high beam is turnd on. (probably stating the obvious, but some cars all lights come on :/ so yeah)

the relay stuff is for proper halo wiring.
the actual projector and high beam share the same socket as oem.

=] have fun.

[kairi_k]

my halos work fine, there was already a plug (2pins) for them..i amware that the projector and high beam lights share the stock socket (3pins)..my highbeam light works when switched on highbeam, and the halos turn on when low beam is switched on??? have i wired them incorrectly?...the projector doesnt light up at all????

[kairi_k]

the projector should be on when on low beam yea?

[RDX]

thanks this is great info

[rayb3na_]

use a relay! =]

[kairi_k]

can someone please explain the relay? how do i set one up? this is confusing...some ppl tell me its a straight plug and play..others say need modifications for the halos...the halos work fine its just the projectors that arnt working