View Full Version : dc2 indicators not working
gach2
01-03-2008, 11:01 AM
hi i have a honda integra 1994 dc2 vtir.
i was driving a couple of weeks ago when my indicators stopped working (when i clicked it, nothing happened).
prior to this the indicators were flashing pretty fast (faster than a lot of other cars) so i thought its probably a fuse. but the hazard lights still work, so im not sure if its the fuse.
if it is the fuse i was wondering where it is (in the engine bay or with the ignition fuses) also does anyone have a fuse diagram for ignition fuses as my integra doesnt have the sticker.
gach2
01-03-2008, 01:20 PM
oh yeah
also need to know which fuse is for the cluster in the ingnition fuses
thx
Tu88y
01-03-2008, 06:41 PM
have a look on the fuse box inside the engine bay or more then likely is the one under the driver dash... It will tell you which one is for the blinkers
replace it with the same one I think its a 10 or so
its a relay in the fuse box under the dash on the driver side
its a square black box dats got "TURN" on it
gach2
01-03-2008, 10:10 PM
where are the relays?
is it with the ignition fuses?
i see two black boxed but none of them anything on the boxes.
am i looking in th right place or not.
theres 2 black boxes (one on the left side and on in the middle)
its next to the steering column ... with all ur other fuses
it says "TURN" on the side of the relay not on the top of it
gach2
01-03-2008, 10:31 PM
urm how many relays are there supposed to be?
i can only see two and none of them have any writing on them
if i remembered correctly .. its the one on the right had side .. just pull it out
its held in buy 2 clip thingy on the sides ... if its says "turn" on it, u found it ... just like printed in paint kinda... not engraved or anything ... dont think u can just look at it and see " turn" ... so pull it out and see
gach2
01-03-2008, 10:57 PM
k thx samo
bit late now to check
ill do it first thing 2morro morning
gach2
02-03-2008, 09:15 AM
i pulled out both black boxes
neither of them had turn on it
both just had mitsuba 12v
one was 3 plug while the other was a 4 plug
are either of these right? (mayb replaced by previous owner)
or am i looking in the wrong place
as i cant find any other plugs in the dash fuse box
gach2
03-03-2008, 07:57 PM
is there any1 that can help
really dont want to take it to an auto electrician
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.