da9/8 wiring loom

[ITEAZR]

ok guys so im puting a b16a into my gen 2 crx that is out of a da9 honda integra ls... i am missing a piece of my b16a da9 wiring loom for that to be connected.. pik below... that has nuthing for that to plug up to, on the engine harness does any1 no wat that pice is for, or where i go from here????

[smomo]

Cant exactly help with your question, but you will probably save a lot of hassle by using the standard crx d-series loom, very little needs to be modified. Just an idea...

[ITEAZR]

ok so wat im trying to say is... on the engine harness there is no plug that will go into plug in picture above


other option is find an crx SiR loom......

[fatboyz39]

hmmmmmmmmmmmmmmmm....

Ill suggest ripping your D series engine looom and install onto the new motor. Everything should clip up. All you need is to add a few wires extra wires, don't know which ones for obd0 conversion.

[ECU-MAN]

as above