pihlor
04-03-2008, 08:55 PM
Hey guys just got my eg about 2 months now started doing the system wat i got so far is my head unit (alpine cda 9885) my alpine type r splits and 6 inch rears i was gonna buy a type r sub but got given a pioneer one so i will use that till it goes but im really confused on wat amp to get cos its an SPL sub doe it make any difference? any who any suggestions for what amp to suit it would be very helpful and are the jaycar amps anygood?
i cant seem to find very much specs for the sub but this is all i could find
the model of the sub is a Pioneer TSW121SPL
12 inch Subwoofer for Enclosure Applications
2,000 Watts Max. Power Handling
3-Layer Fibre Woven Radial Surround
Dual 4 ohm Voice Coil Windings
Silver Binding-post Terminals
DESIGN & SPECIFICATIONS
12" Subwoofer for Enclosure Applications
2,000 Watts Max. Power Handing
750 Watts Nominal Rating
Qts = 0.328
Xmax = 12.7mm
Fs = 29.9 Hz
Vas = 34.53 litres
Frequency Response: 18 – 2,000 Hz
Efficiency: 89dB
Impedance: 2 or 8 ohms
Lowest Resonant Frequency: 30Hz
Recommended Sealed Enclosure: 42.5 Litres
CONSTRUCTION & MATERIALS
Interlaced Glass Fibre + Carbon Fibre Reinforced IMPP Cone
3-layer Fibre Woven Radial Surround
3.1kg Double-stacked Ferrite Magnets
Dual 4 ohm Voice Coil Windings
4-layer Ceramic-Coated Copper Round Wire Voice Coil
Long Voice Coil Design
65mm Glass Imide Voice Coil Bobbin with 4 Cooling Slits
Extended (10mm) and Vented Pole Yoke
Large Diameter Conex Damper with Damper Ring
Laminated Carbon Fibre + Paper Composite Centre Cap
4-spoke Diecast Aluminium Black-coated Metal Basket
"SandBlast" Basket Texture
Silver Binding-post Terminals
DIMENSIONS
Mounting Depth: 175mm
Dimensions: 329 (diameter) x 195mm
8 Mounting Screw Holes
Cutout Opening: 278mm (diameter)
i cant seem to find very much specs for the sub but this is all i could find
the model of the sub is a Pioneer TSW121SPL
12 inch Subwoofer for Enclosure Applications
2,000 Watts Max. Power Handling
3-Layer Fibre Woven Radial Surround
Dual 4 ohm Voice Coil Windings
Silver Binding-post Terminals
DESIGN & SPECIFICATIONS
12" Subwoofer for Enclosure Applications
2,000 Watts Max. Power Handing
750 Watts Nominal Rating
Qts = 0.328
Xmax = 12.7mm
Fs = 29.9 Hz
Vas = 34.53 litres
Frequency Response: 18 – 2,000 Hz
Efficiency: 89dB
Impedance: 2 or 8 ohms
Lowest Resonant Frequency: 30Hz
Recommended Sealed Enclosure: 42.5 Litres
CONSTRUCTION & MATERIALS
Interlaced Glass Fibre + Carbon Fibre Reinforced IMPP Cone
3-layer Fibre Woven Radial Surround
3.1kg Double-stacked Ferrite Magnets
Dual 4 ohm Voice Coil Windings
4-layer Ceramic-Coated Copper Round Wire Voice Coil
Long Voice Coil Design
65mm Glass Imide Voice Coil Bobbin with 4 Cooling Slits
Extended (10mm) and Vented Pole Yoke
Large Diameter Conex Damper with Damper Ring
Laminated Carbon Fibre + Paper Composite Centre Cap
4-spoke Diecast Aluminium Black-coated Metal Basket
"SandBlast" Basket Texture
Silver Binding-post Terminals
DIMENSIONS
Mounting Depth: 175mm
Dimensions: 329 (diameter) x 195mm
8 Mounting Screw Holes
Cutout Opening: 278mm (diameter)