Ring Gasket size for Maximworks

[macoman69]

Need to know what size the ring gasket is on the end of the Maximworks 4-2-1 Headers for DC2R.

Need answer asap so if anyone knows please let me know

thanks

[macoman69]

I believe the maximworks end is a diameter of 60.5mm.

Can i just go to honda and get a gasket or is this a special one

[aaronng]

If you are mating the maximworks to your stock cat, then shouldn't the two be the same diameter? Find out the gasket size for your cat. If you have a stock cat, then you should be able to get it from Honda. Otherwise, you'll need an aftermarket one, which you can get from any exhaust workshop.

[macoman69]

It will be bolting up to a hi flow aftermarket cat.

Just to clarify. the gasket im referring to is the one that slots of the end of the maximworks headers. looks like half a donut with wires going through it.

[TODA AU]

Use OEM S2000 gasket from Honda
Or Buy on from me or JDM Yard.
Both have in stock.

[macoman69]

This is Adrian right?

Are you 100% sure S2000 ring gasket will work?

I would buy it from you but i need it buy tomorrow morning so i might just have to get it from honda.

Can you just verify that it will definitely work and what the part number is or what it is called

thanks for you help so far been really good help.

[TODA AU]

We use JDM FD2 CTR gaskets... PN: 18229-SLJ-023
The previous S2000 PN: 18229-PCX-003 is nil stock in Japan, (superseeded by above PN)
This is likley still available through Honda Australia as the the S2000 gasket.
Cheers

Adrian

Edit:
We also have test pipes available with correct flanges etc for that gasket.
JDM yard has the larger female donut flange on it's own.
PM: EG5 for price is you need that.