HELP!! window keeps coming off!!

[Civic VTi-R]

hey guys this is really pissin me off... i have a 2000 VTi-R coupe and my driver's side window keeps coming off the rails. iv'e fixed it about 5 time but it keeps happening.

anyone had this problem?? or can tell me how or where to get it fix once and for all
thanx

[Bludger]

must be something loose that you've overlooked

[Civic VTi-R]

ive checked every nut and bolt, tight as

[Bludger]

just buy or steal a whole new door

problem fixed

[Civic VTi-R]

lol thats wat i was thinking about doin

[Bludger]

which??

buy or steal?

if you steal it, you can shop around for the colour that matches your car

[Civic VTi-R]

steel sounds good

[Civic VTi-R]

you no anyone with a green coupe?

[bungsai]

open the door (take off the door trim) and reglue the window into its seat.

[shadou]

then spray silicon into the rubber guide channels.

[omgzilla]

Never seen an Integra window rail set, but maybe the rails are bend/skewed?

Lube the window tracks/guides.

Maybe the reason it keeps jumping off the rails is because the guides rubbers are gripping on the glass and skewing it.

[Civic VTi-R]

thanks guys ill give it a go

[Bludger]

less effort required with my idea, imo

[EK1-2NV]

yeh i have a green coupe and i have the same problem its really annoying.

[Limbo]

my friend's GLI did the same thing. I ended up giving him a tube of silicone glue and he glued the bottom bit. He never complained about it again

[Civic VTi-R]

i thought i was the only one with the problem... ill give it a go this weekend, thanks

hey em12nv ill let you no how i go

[James The Wog]

got any mate's that are pannel beaters? take it to pannel beaters, they will fix/tell you whats wrong in 5 mins

[rpm boy]

Its rob ill fix it on saturday

[Civic VTi-R]

cool.. dont dog it again

[EK1-2NV]

thanks man so how did u go ?

[Civic VTi-R]

sweet as... its was abit slow going down, all you gotta do is use more silicone

[hai]

i think change the suroundings sill rubber on the window

[B16bcivic]

bro its nothing to do with your seals or anything. its to do with your actuator alignment. coz i got the same problem. and got a new actuator and it fixed the damn problem.