panpan
12-03-2008, 04:16 PM
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Since my car is imported and the starter motor could be different to AUD model.
Purpose: Replace the broken starter.My starter doesnt work very well and I bought a new one.
Required: Socket ~~~ Around 9-12mm..I forget~~~
New Starter
A Car: 1994 EG4 Hatch~~auto/manual
Difficulty: I think it is 2 stars out of 5 stars...
Step 1). It is better to detach the power connection from battery prevent damage the car~~
Step 2). Detach the air intake duct...Because I think it would be easier to do the work without it..~~The starter is on the driver side and next to engine .you can spot it easily and locate it...There are more pictures about how its look like.
http://i264.photobucket.com/albums/ii170/panpanw/DSC08062_.jpg
Step 3).unscrew the sockets on the starter, unattach the power cable from the starter and remove it
http://i264.photobucket.com/albums/ii170/panpanw/DSC08063_.jpg
Here is the old starter
http://i264.photobucket.com/albums/ii170/panpanw/DSC08064_.jpg
you can see the starter's model is : Denso made DX4RE
http://i264.photobucket.com/albums/ii170/panpanw/DSC08066_.jpg
The holes and connectors I circled with red which are the screw and connection of the starter.
http://i264.photobucket.com/albums/ii170/panpanw/DSC08070_.jpg
You can noticed that the screws are in different length,dont get it wrong~
Step 4) Plug in the starter as removed and reattach the power cables and screw
http://i264.photobucket.com/albums/ii170/panpanw/DSC08071_.jpg
http://i264.photobucket.com/albums/ii170/panpanw/DSC08073_.jpg
There is the +ve power cable and -ve, attach them
http://i264.photobucket.com/albums/ii170/panpanw/DSC08074_.jpg
make sure it is securly attached...
http://i264.photobucket.com/albums/ii170/panpanw/DSC08076_.jpg
Here is the picture showed it is installed..~
Final step)Dont forget to reattach the air intake duct and attach cables on the battery...
http://i264.photobucket.com/albums/ii170/panpanw/DSC08077_.jpg
And have a goal and test~~~
Please give me some feedback that I could be a real member in Ozhonda..
Since my car is imported and the starter motor could be different to AUD model.
Purpose: Replace the broken starter.My starter doesnt work very well and I bought a new one.
Required: Socket ~~~ Around 9-12mm..I forget~~~
New Starter
A Car: 1994 EG4 Hatch~~auto/manual
Difficulty: I think it is 2 stars out of 5 stars...
Step 1). It is better to detach the power connection from battery prevent damage the car~~
Step 2). Detach the air intake duct...Because I think it would be easier to do the work without it..~~The starter is on the driver side and next to engine .you can spot it easily and locate it...There are more pictures about how its look like.
http://i264.photobucket.com/albums/ii170/panpanw/DSC08062_.jpg
Step 3).unscrew the sockets on the starter, unattach the power cable from the starter and remove it
http://i264.photobucket.com/albums/ii170/panpanw/DSC08063_.jpg
Here is the old starter
http://i264.photobucket.com/albums/ii170/panpanw/DSC08064_.jpg
you can see the starter's model is : Denso made DX4RE
http://i264.photobucket.com/albums/ii170/panpanw/DSC08066_.jpg
The holes and connectors I circled with red which are the screw and connection of the starter.
http://i264.photobucket.com/albums/ii170/panpanw/DSC08070_.jpg
You can noticed that the screws are in different length,dont get it wrong~
Step 4) Plug in the starter as removed and reattach the power cables and screw
http://i264.photobucket.com/albums/ii170/panpanw/DSC08071_.jpg
http://i264.photobucket.com/albums/ii170/panpanw/DSC08073_.jpg
There is the +ve power cable and -ve, attach them
http://i264.photobucket.com/albums/ii170/panpanw/DSC08074_.jpg
make sure it is securly attached...
http://i264.photobucket.com/albums/ii170/panpanw/DSC08076_.jpg
Here is the picture showed it is installed..~
Final step)Dont forget to reattach the air intake duct and attach cables on the battery...
http://i264.photobucket.com/albums/ii170/panpanw/DSC08077_.jpg
And have a goal and test~~~
Please give me some feedback that I could be a real member in Ozhonda..