Hello

[URECKN]

Hi my name is Jono, I have a 2004 DC5 Integra.

Looking forward to chatting away with other DC5 owners as the community we have here in NZ is very small.

Car has a few mods here and there, next mod looking at getting a oil cooler as the oil temp on track seems to be little high.

[integra95]

pretty intense looking kit mate, car looks good, obviously just track use yea? what are the specs?

[URECKN]

My shop in NZ has distribution rights for BuddyClub in New Zealand.

Car has pretty much been setup as a demo car for them just to show off there parts catalog. Daily Drive the car to work and around every day :)

Parts List

BuddyClub Bodykit
Buddy Club Carbon Fibre Bonnett
Buddy Club 3D GT Wing

18 x 8.5 BuddyClub SF Wheels
225 40 R18 Toyo R888

Carbonetic 280mm 2 piece Rotors
4 Pot Racing Calipers
Racing Break Pads
Braided Brake Lines
Carbonetic LSD
Carbonetic Twin Plate Carbon Clutch

Injen CAI
Buddy Club Exhaust Headers
Buddy Club Spec III Pro Exhaust

Hondata KPro
Buddy Club DigiMeter Guages (Oil Temp, Oil Pressue, Water Temp)
Buddy Club Fan Switch

J's Racing Oil Catch Can
Buddy Club Battery

Buddy Club Racing Seats
Buddy Club Super Low Seat Rails
Buddy Club Short Shift Kit

Buddy Club Racing Spec Suspension
Cusco B Pillar Braces

Pretty much think that is about it, on the look out for an oil cooler if anyone has any ideas ?

[Jarkz]

G'day Jono & welcome... Pretty full house DC5.

Had the thing on the dyno? HP/KW???

[URECKN]

Hey Jarkz :)

Car is currently making 163kw at the wheels (Hub Dyno). Car will be going out to Speedtech Motorsport (Tuners of the worlds fastest GTR) for a full forged rebuild with all the BuddyClub Spec Cams and head work.

KPro hands down the best mod soo far :)

[beeza]

Hello mate!
Your a lucky man driving that daily :)

[sendok]

Hi Jono, good to see you and your car here... welcome and enjoy ur stay :D

[Jarkz]

Hey Jarkz :)

Car is currently making 163kw at the wheels (Hub Dyno). Car will be going out to Speedtech Motorsport (Tuners of the worlds fastest GTR) for a full forged rebuild with all the BuddyClub Spec Cams and head work.

KPro hands down the best mod soo far :)

Holly crap... :thumbsup:

please post future pic's & info on this thing :p

[URECKN]

Hey Everyone,

The last few weeks have been pretty busy for the car.

We managed to finish first in the N/A Street Class at the recent NZ Super Lap competition.

We also attended a recent Subaru track day at the A1GP Track in Taupo, not only did we manage to better our time by over 2 seconds (Brake Upgrade and Wider Rims) but we also managed to show all the turbo Subarus that the honda is the real track monster :)

Got a local hill climb this weekend :)

Next for the car is Stage III Cams, Adjustable Cam Gears, Titanium retainers and Springs. Also we have some ITB on the way from the UK.

Here are some pics from the recent track days.

http://i269.photobucket.com/albums/jj41/lil_miss_trbl/Mega%20Meet/489.jpg
http://i269.photobucket.com/albums/jj41/lil_miss_trbl/Mega%20Meet/490.jpg
http://i269.photobucket.com/albums/jj41/lil_miss_trbl/Mega%20Meet/499.jpg
http://www.photobyrichard.com/misc/060408SuperLap/album/Misc/slides/20080406_0001.jpg
http://www.photobyrichard.com/misc/060408SuperLap/album/Misc/slides/20080406_0118.jpg

[rawr]

very very nice. Grats on the improvement.

Post these pics up in the appearance gallery

[CIV13]

Very nice car.. I've been talking to a guy over there called Cole who's helping me out with a 350Z kit.. He was saying there weren't too many tegs over there.. Shame :P Welcome to the forum :D

[Lukey]

Very nice!

[hooyn]

dam nice !!!!!!!!

[Ry_]

Wowww.. very nice :)!

[URECKN]

Thanks Everyone :)

The car competed in a local hill climb last weekend and won its class, frying the clutch in the process :)

http://i105.photobucket.com/albums/m202/SXYLEG/Bailey%20mouse/mt%20vic%20hillclimb%2008/IMG_2191Small.jpg

Car is going out to Speedtech Motorsport (Tuners of the worlds fastest GTR) over the next week for some more bits to be fitted up :)

Carbonetic Triple Plate Carbon Clutch
Stage III Cams
Titanium Retainers
Value Springs
Adjustable Cam Wheels
CPL Racing ITBs
NOS
Retune with the KPro

http://www.cplracing.co.uk/htmlarea/uploaded/k_series%20itbs.jpg

[IEVAQ8]

amazing.....................car looks awesome

[URECKN]

Thanks :)

Here is a video one the boys over here has started to put togeather :)

http://youtube.com/watch?v=m7JJtf4TO2U

This is the first draft more to come once we have some more RAW footage :)

[IEVAQ8]

tuff..................

[kikxz]

bloody nice mate very good job hope this sites what u wanted

[xntrik]

Wow its getting Nos!

[baeshin]

cooool

[beeza]

I know she's built for corners but have U done the 1/4 in this set up? new set up,hopes? :)

[URECKN]

I know she's built for corners but have U done the 1/4 in this set up? new set up,hopes? :)

After talking to the tuners this morning they are expecting 11's out of the car in current spec.

We have the older 2pot brakes to put on the front so we can run some 14's with drag slicks.

We would like to give it a real good shot to see exactly what we can get out of it, the owner of BuddyClub NZ thinks that "10second Teg" has a nice ring to it :)

Although we will have to see once we have a few base line runs where some time can be made up.

Currently looking into a Ikea Sequential Shifter for the DC5 anyone have any experiance with these ?

[beeza]

Awesome.That would be so much fun to drive round da' twisties :)

[URECKN]

Hi Everyone,

We have just returned from another weekend racing with some fantastic results.

Some of the boys have put togeather another video with action from the dyno and incar track stuff.

http://www.youtube.com/watch?v=7qb6G8Oualo

As you will be able to see all the ITB's etc are on now and performing perfectly.

We had to remove the power steering to get the ITB's which made life a little difficult but we have a electric power steering pump on the way to sort that out :)

http://file040b.bebo.com/3/original/2008/06/05/20/12490120a7946469825o.jpg


Check it out

Jono

[evoline]

ITB /drool

[Tegzieboi_BAR]

dAMN!!! Cant wait 2 get my dc5r!!!

[integra95]

yea im totally wanting a dc5 now..i was deffinately thinking a new astra coupe but nah f*ck it that DC5 is sick...for some reason i thought buddy club went out of business, i remember some1 telling me that when i wanted a set of P1s, obviously still going strong i can see...can you shed some light on why buddy club isnt bringing over nemore rims to AUS or is that all just crap?!?

[URECKN]

yea im totally wanting a dc5 now..i was deffinately thinking a new astra coupe but nah f*ck it that DC5 is sick...for some reason i thought buddy club went out of business, i remember some1 telling me that when i wanted a set of P1s, obviously still going strong i can see...can you shed some light on why buddy club isnt bringing over nemore rims to AUS or is that all just crap?!?

DC5 is definalty a better option than a astra coupe :)

Definatly not going out or out of business, BuddyClub is going strong in Japan, NZ, USA and I believe Australia as well. www.BuddyClub.com.au

We did have some stock issues with the P1s late last year as there was such a huge demand world wide the factory could not keep up lol

All the P1's are now back in stock, if you have any trouble getting them let me know and I will be able to organise them for you :)

[Nikki]

i seem to be more interested in the azn guy at the back of the pic then the car 0o

[integra95]

yeh wikkid! when i get my DC5R im deffinately putting gunmetal p1s on it

[Tegzieboi_BAR]

SEX ON WHEELS!!!
i was never a huge fan of the BC body kit but i love the sideys n rear.. looks awesome!

[URECKN]

New widebody kit will be put on the car post Christmas.

This will allow us to run some 17 x 9 BuddyClub QF Rims :)

Here are a couple of snaps of the kit, we will be redoing the graphics as well to suit :)

http://images.importtuner.com/features/0607impp_02z+honda_integra_type_r+left_front_view. jpg
http://images.importtuner.com/features/0607impp_16z+honda_integra_type_r+right_front_view .jpg