Log in

View Full Version : jdm dc2r aftermarket ECU!


dslt
13-03-2008, 08:31 PM
Hey guys, Planning on tuning my jdm dc2r soon. Just wondering which ecu i should go for Apexi Neo, Vafc2, E manage, Hondata s300, or apexi FC. Not planning to go boost anytime soon, just sticking to NA for the time being. I have the usual bolt on mods at the moment. I/H/E

Also which ecu would be easiest to get tuned for my car?
What sort of power figures would i be "ROUGHLY" getting after the tune?

Reason for tuning = planning on going to 1/4 soon

Any help would much be appreciated!

Cheers guys =)
tRipitaka
13-03-2008, 08:32 PM
where are you located ?
dslt
14-03-2008, 05:32 AM
melbourne
Tu88y
14-03-2008, 06:24 AM
What H/I/M will you be putting on????

I would recommend Crome, Hondatat or PFC for the job

Power is depends on what mods you do? What headers will you be using? What Intake will you be using? What exhaust will you be using???

How deep are you pockets is the question now?
dslt
14-03-2008, 06:29 AM
ok atm, BC headers, BC spec 2 exhaust, stock jdm cat, aem intake
Tu88y
14-03-2008, 11:16 AM
Stock ITR I think it does about 105kw to 115kw

I would say with that mods you should be getting somewhere between
115kw to 130kw I could be wrong.

How much power are you expecting or let me rephrased the question how much power do you want?????
dslt
14-03-2008, 11:24 AM
Stock ITR I think it does about 105kw to 115kw

I would say with that mods you should be getting somewhere between
115kw to 130kw I could be wrong.

How much power are you expecting or let me rephrased the question how much power do you want?????


Yeah looking for about 125atw. not sure if there is much diff in jdm type r and adm. My mate also has a jdm type r which dyno'd at 117atw completely stock standard. With about 110,000km on engine.

Im after a lil more than that of course, but not really fussed. Just want more power thats all =0
Tu88y
14-03-2008, 11:27 AM
Well it really also depends on the dyno have you dyno you car yet?????
Limbo
14-03-2008, 12:33 PM
get a full ECU, hondata or PFC, more support for these units and more tuners to pick from.

I've seen both tuned and they both work really well
fatboyz39
14-03-2008, 01:21 PM
Hondata s300. Power output 0-125kw atw.