PDA

View Full Version : Wheel PCD


JZ45HO
16-03-2008, 05:33 PM
will 114x5 PCD wheels fit on a 114.3x5 hub?
jdm_kid
16-03-2008, 07:12 PM
What wheels are they.... ?
You can always make the PCD hole bigger ...
Feverpitched
17-03-2008, 08:40 AM
PCD is the size of the bolt spacing.

http://www.mgf.ultimatemg.com/group2/suspension/wheels/PCD_figure.jpg

It is NOT the central hub hole which, if bigger on the wheel than it is on the hub, can be resolved using hub-centric rings.

If the PCD doesn't fit, find some new wheels.
SiReal
17-03-2008, 09:16 AM
Ask the seller whether he made a mistake in description or not. It usually is 114.3..

As a rule of thumb, NO they will not fit. But I personally have never heard of 114 PCD wheels before.

Its usually 110, 115, 120, 114.3, 100.
BiLL|z0r
17-03-2008, 12:32 PM
That's what I was thinking. 114 is technically 114.3 but some people get lazy with the .3.
Feverpitched
17-03-2008, 01:25 PM
114 PCD wheels do exist, so I'd be wary.
D4rk4n63l
17-03-2008, 02:59 PM
never heard of 114 neither.. maybe the seller is just lazy, but like said ^ , they might exist.. I dont know

But I reckon 0.3mm is the about the size of the gap between the studs and the rim holes anyway. So as long as you use the proper concentric rings, theoretically it should fit no problem
Feverpitched
17-03-2008, 03:08 PM
Ok I'm back into snapping mode.

1. Google it up 114 PCD. They exist.
2. The PCD is NOT the central hub size. Google that too.
SiReal
17-03-2008, 03:41 PM
lol feverpitched. i'm glad we have someone observant like yourself. keep the info coming. no need to snap, just inform :)