sway bars on EG

[akusuma]

I have a couple of questions regarding sway bars on EG vti

1. Can I use the EM1 end links or I need to use my current EG end links to fit the EM1 FRONT sway bar on the EG?
2. For the rear ones, do I need to use EG6/DC2R LCA to fit DC2R rear sway bars on the EG? Should I use the end links from the DC2R sway bar or use the end link from current EG sway bar?

thanks

[An41]

2. No, you can run DC2R swaybars on EG vti,si. DC2 LCA's

[akusuma]

thanks for the reply, is that with DC2R end links or EG end links if I want to use non EG6/DC2R LCA?

or I can use any end links ?

[jdm_kid]

u do not need EG6/DC2R LCAs to fit the ITR sway bar. Stock LCAs will be fine.

[akusuma]

even if I want use DC2R end links right?

how bout number 1? what do I need to fit EM1 front sway bar on EG? just change the end links?

thanks

[jdm_kid]

Yes you can use DC2R endlinks that came with the DC2R sway bar.
No the EM1 front sway bar wont fit your EG. who told u that ?

[akusuma]

ok. nobody told me, just thought that em1/ek4 front sway bar can fit on EG/DC if I change the end links.

[jdm_kid]

nope. u gotta think about the chassis mate. EM/EK are never interchangeable with EG/DC.

[akusuma]

cool, thanks for the clarification.

[bennjamin]

nope. u gotta think about the chassis mate. EM/EK are never interchangeable with EG/DC.

Not chassis....subframe

To fit a EG/DC swaybar to a EK and vice versa - you need the front subframe and LCA's from the swaybars original fittment.



IE

DC2R swaybar onto a EK - you need DC2 / EG subframe.

EK swaybar onto a EG - you need EK4/EM1/EK1 front LCA's and EK subframe

[jdm_kid]

lol oh yeh true that. i consider subframe as chassis haha stock is the way to go

[bennjamin]

best bet yup.

Get a swaybar that suits your car :)

Rather than muck around with other cars parts etc....cheaper and easier in the short and long term :)

[akusuma]

thanks guys

[NSPYRE]

with a thicker sway bar (eg 24mm whiteline), is it neccesary to have a sub-frame brace like ASR?

[Sydsyd]

although it's not really necessary, it's RECOMMENDED to have a subframe brace to avoid any subframe tears from having way thicker swaybar than stock...

it rarely happens to EG/EH, more often happen to EKs (maybe EJ8s and EM1s too since they share the same chassis/subframe with EKs)...