changing front lights on integra, your thought and how hard is it?

[connections]

thinking about buying a set of these halo style front lights for my integra

http://optionaustralia.onlinera.com/OA/Uploaded/SP-HD002-CP-P1.jpg

heres a pic of my car -

http://a731.ac-images.myspacecdn.com/images01/66/l_c7f7a92bc0ee2f3ce3f6cedd1b42cef2.jpg

any one running these lights?

what would they look like on my car?

thanks

[Q_ball]

Seen one today at KK liverpool except it was on a facelift ITR instead of a prefacelift...
Tbh.. doesnt look tooo bad... however i would question the projector/light quality of anything aftermarket..

In terms of ease of installation... its pretty straight forward.

-Lift bonnet,
-Unbolt + remove front bar
-Unhook headlights from the housing
-Unbolt the headlight from the radiator support + remove
-From there, simply put the aftermarkets in the same way u pulled em out.

[connections]

ill probly get them as two of my lights are faded atm and they look dodgy.

any more info on this step "+ remove front bar"

thanks.

[Q_ball]

Bolts for the front bar are located along the top of the radiator support, and also in the front half of the wheel arches.

[connections]

thanks for the info q-ball.

but who knows about the halo's how do they work,

in the eBay listing it does not say jack about them.

any on got a pic of these on a car to post up?

thanks

[destrukshn]

you'd hook them up to your parkers.
or you can make a manual switch so you can turn them on anytime you want.

[T-onedc2]

thinking about buying a set of these halo style front lights for my integra


any one running these lights?

what would they look like on my car?

thanks
The lights pictured are for facelift 98+ even though it says 94-97, you need 98+ front bar to make em look right.

[connections]

The lights pictured are for facelift 98+ even though it says 94-97, you need 98+ front bar to make em look right.

http://optionaustralia.onlinera.com/OA/Uploaded/SP-HD003-CP-P1.jpg

I would imagine they are the right size.

have you purchased these and have them installed into your car?

thanks

[T-onedc2]

no but I know my light lenses (98+ type) stick through the bar much further than yours. If it was me i'd ask the seller some more questions as I've never seen halo lights available for 94-97

[connections]

well the seller quotes in his auction that these will deffiantly fir the 94-97

this dude has alot of feedback so he must be legit.

but thanks for the concern i will email him to double check dont want to be buy dodgy non fitting lights hehehe =)

[connections]

purchased these today lets hope they fit LOL

[vincikwan]

if they fit..post some pics...i wanna get them too...

[connections]

if they fit..post some pics...i wanna get them too...

will do.

if they don't fit I will be Pissed...

I think these should look ok on my car as its dark blue black ish

[Tegzieboi_BAR]

They definitely do sell pre-facelift halos. ive looked around a bit in the past n yeah, they're available. Unfortunately tho, a lot of sellers on the net hav no idea what they're talkin bout so u gotta b careful.

I fitted a set of halos for a friend's EG a month ago n installation was quite simple altho it didnt fit the guards 2 flush, shouldnt hav that prob with tegs tho coz of where they sit.

Watch out for a black relay wire prolly on the passenger side parker, u'll need 2 hook it up in order for both halo's 2 work.

Other possible issue is the lights not pointing in the right direction. U'll need 2 park it near a wall n play around with the lights so they r both level n dnt point 2 high/low.

Projectors seemed pretty good, wouldnt say any worse than stock.

[connections]

reason i was kinda keen to get some new ones as well was becuase my old lights are all faded and looking seedy, i cant be bothered to take them off and sand them back so I purchased these.

thanks for the info tegzie boy

[Tegzieboi_BAR]

No probs, make sure 2 post up some pics when u fit them. Im keen 2 get a set 4 myself actually.

[connections]

yer i will alot of people wanna see pics LOL

about 4 ppl have asked..

[connections]

http://img396.imageshack.us/img396/265/photo0019xm0.jpg

new lights came today i did a quick measurement of the sizes looks to be ok..

hopefully no dramas on instillation.

[Lukey]

I wanna see them installed and working, was thinking of getting something similar aswell. xD

[fujitsu]

The left one looks a bit smaller than the right one or is it the angle?

[connections]

The left one looks a bit smaller than the right one or is it the angle?

nah man their exactly the same size its the angel..

i will install this weekend hopefully..and have pics up as every ones pretty keen to see some

just been busy

[connections]

bumper bar off

http://img410.imageshack.us/img410/5594/photo0025at3.jpg


front bar off

http://img510.imageshack.us/img510/1540/photo0026vl9.jpg

old light all faded

http://img510.imageshack.us/img510/7228/photo0027gx4.jpg


hooking up halo lights to parkers,

red wire to red wire,

white ground wire to black ground wire..

http://img184.imageshack.us/img184/7230/photo0035lb7.jpg

new lights botled into stock mounts, fit pretty flush

http://img134.imageshack.us/img134/4439/photo0038ic4.jpg

new headlights in fit pretty much as standard frotn bar not fully alligned as all screws not in yet

http://img146.imageshack.us/img146/8223/photo0039ii9.jpg

passanger side headlight

http://img170.imageshack.us/img170/1223/photo0053pe0.jpg

front bar still needs to be botled on more ect ect

http://img170.imageshack.us/img170/8610/photo0056qn0.jpg

problems during install -

the only problem was a faulty globe in one of the lights,

considering their were no instructions with these lights I did ok.

more pics soon when every thing is hooked up correctly and finished off


hopefully night shots too

[GSi_PSi]

i might get these lights..and on the way might get a facelift bar aswell with the halo facelift lights....

[connections]

yeah finished hooking up every thing,

it all sits flush, and correctly

these lights are deffiantly the right size, all halos and every thing works as well..

just hope I don't get defected now..

[nomcice]

where did you buy them from?

[connections]

cam pics of halos

http://img444.imageshack.us/img444/5161/blue1ma2.jpg

http://img529.imageshack.us/img529/4629/blue2pa7.jpg

http://img512.imageshack.us/img512/137/blue3vj7.jpg

mobile phone pics of lights

http://img291.imageshack.us/img291/7522/photo0063tj0.jpg

http://img291.imageshack.us/img291/5768/photo0060to9.jpg

http://img201.imageshack.us/img201/2257/photo0059tm8.jpg

[chinesewhisperz]

halos lookin good on your ride man.
another thing is why would u blank half your plates & expose the other half? haha

[Sp00ny]

I have bought the same lights (98spec) and the build quality isnt OEM but is definantly of high standard. However, the projector light output is horrible, and is almost bad enough to consider not using them. I also found the LED's used in the halo's dont last long.

I ended up doing a custom HID OEM Retrofit in mine, and because of the way the frame is built it worked out quite well and was relatively easy. I used RX330 Projectors & 300ZX Lenses. Light intensity, beam pattern and cutoff are fantastic and IMO better overall than the Accord Euro HID projectors. If your somewhat handy then it doesnt work out to be too expensive if you do it yourself. I also replaced the LED's that power the halo's with higher intensity and better quality ones.

Just My 2cents

BTW: If your worried about cop trouble just hook up a switch to the halo's so you can control them independantly to the driving lights. I did ;)

[connections]

halos lookin good on your ride man.
another thing is why would u blank half your plates & expose the other half? haha

yeah I did it because the plates were glowing up heaps in the pic's i took with my cam and I wanted more emphasis to the halos LOL

[connections]

I have bought the same lights (98spec) and the build quality isnt OEM but is definantly of high standard. However, the projector light output is horrible, and is almost bad enough to consider not using them. I also found the LED's used in the halo's dont last long.

I ended up doing a custom HID OEM Retrofit in mine, and because of the way the frame is built it worked out quite well and was relatively easy. I used RX330 Projectors & 300ZX Lenses. Light intensity, beam pattern and cutoff are fantastic and IMO better overall than the Accord Euro HID projectors. If your somewhat handy then it doesnt work out to be too expensive if you do it yourself. I also replaced the LED's that power the halo's with higher intensity and better quality ones.

Just My 2cents

BTW: If your worried about cop trouble just hook up a switch to the halo's so you can control them independantly to the driving lights. I did ;)

yeah i hooked them up to my parkers so then i can switch between parkers, lights and high beam ect ect..

the out put is ok seems same as oem.

[Riviera]

they look great man sum1 asked where u purchased them from also...?

they got any for other models :p lol

[Tegzieboi_BAR]

damn, is it just me or r ur parkers yellow as. Get some LED's or decent whitish globes 4 them or maybe just unplug em coz u dnt really need em anymore n the full package will look nuts!

Good stuff mate, really keen 2 get mine now!

[connections]

damn, is it just me or r ur parkers yellow as. Get some LED's or decent whitish globes 4 them or maybe just unplug em coz u dnt really need em anymore n the full package will look nuts!

Good stuff mate, really keen 2 get mine now!

yeah i was thinking of doing that,

nah their not usually that yellow its the mobile phone camera.

thx for the comments, yeah its worth doing this mod its not that hard and the new lights are better then stock imo