PDA

View Full Version : Civic EG hatch Side Strip removal ...



joey99
30-03-2008, 01:29 PM
I see that a lot of you guys have removed the gunmetal colored side strip from your EG hatches.

Are they just stuck on with double sided tape ? Are there holes underneath ?

I'm guessing just running fishing wire underneath should get them off?
Just want to make sure before I try it.

thanks guys

driftr
30-03-2008, 01:45 PM
i think that they have clips so u have to take your door trim off and push the clips out that makes them come off. thats how they are on ek civics so they should be the same on EG.

joey99
30-03-2008, 02:28 PM
does that mean there're holes underneath ?
so those if you who have taken them off ... have you had to fill the holes and paint it again?

driftr
30-03-2008, 02:38 PM
yep just use abit of filler and some paint

teh_mechanic
30-03-2008, 05:49 PM
yeah theres holes under there,pretty ugly,you have to fill it in and paint over

joey99
01-04-2008, 12:18 PM
that sux ... I thought it was a easy job.
oh well .. I"ll have to leave that will something needs to be painted.
thanks for the info guys :)

defect
02-04-2008, 02:22 AM
do it, it looks clean!!

teh_mechanic
02-04-2008, 07:17 AM
yeah it looks clean but its expensive as you have to respray the whole side of the car unless you want to just fill it in and mask off the side and use dodgy touch up paint that is not going to blend with the other paint at all.

people usually only do it when you are getting a full respray.....or else it looks shit