Accord Euro Mods

[SRVTIR]

Guys,

This is just an email to show us all your mods to your Euro..

Its been done before but i thought, lets get everybodies mods into one thread so people can read through them. The more pics the better :D

[hooyn]

Injen CAI
Tein SS
C/f Grill + mugen badge.
Rims. that i got with car.
18% tint
ozhonda decal
selby rsb 18mm
no accord and euro on the back.
that is all :D

[SRVTIR]

lol nice pics man lol lmao

http://img.photobucket.com/albums/v285/KoUkLa23Q/P120308_194301.jpg

http://img.photobucket.com/albums/v285/KoUkLa23Q/untitled.jpg

http://img.photobucket.com/albums/v285/KoUkLa23Q/NDULGE40.jpg

[tony1234]

Mods.
Bilstein/Eibach shocks/springs.
18mm RSB.
Cusco ft.top strut brace.
Comptech intake with K&N filter.
Comptech headers.
AP racing front pads.
Car sound upgrade inc.Boston splits in ft.Alpine DDdrives rear,
Kenwood 10"sub,Alpine 4 ch. 200WRMS amp,Kenwood bridged 120WRMS
amp driving sub,Dynamated front doors.
17"BMW M series copy rims.
225/45 Conti Sport Contact tyres.
Rear lip spoiler.

[Dru42]

Mods: Custom CAI

extras: Skunk 2 knob n sticker, white cabin led's, xcarlink mp3 and some rubbish, needs a clean

[Pumped]

Engine:
- Injen Intake
- Buddyclub Catback Pro Spec Exhaust
- Topspeed 4-2-1 stainless steel header
- Custom Metal 'Cat hi-flow catalytic converter
- Optima yellow top battery
- Mugen Oil Cap
- Spoon Sports reservoir covers
- Red Tappet Cover

Suspension:
- King Springs
- Whiteline rear sway bar
- Cusco type OS front strut bar
- Cusco Lower Arm Bar
- (Zeal Coilovers, currently uninstalled)
Wheels & Tires:
- Dunlop Sports 225/35/19
- 19" Ozzy Racing Volk Nova Wheels
- Mugen Dustcaps
Brakes:
- DBA 4000 Series Rotors
- Project Mu B Spec Pads (Front)
- EBC Greenstuff Pads (Rear)
Exterior:
- Honda Modulo Front, Side & Rear Skirts
- White LED Parkers
- LED License plate bulbs
- EuroR Badge
- Boot Lip Spoiler
- Euro R Front Grille

Interior:
- 15% Black Tint
- Dynamat
- Skunk2 Gearknob
-Custom Boot Install
-Sports Pedals
Stereo:
-Alpine 9855R Head Unit
- Alpine SPX177R Splits
-2x Infinity 2 channel amps
- 2 x 12” Infinity Subs
- Infinity Monoblock
-Stinger Capacitor
- Stinger 0 gauge Wiring
- Stinger Pro Terminals
- Stinger Distribution Block
- Custom Earthing
- Rockford Fosgate RCAs
- Comptech battery tie down


Probably missed some lol

[honki3rider]

Injen CAI
BC P1 racing wheels
Rays nuts
Razo knob
painted calipers?

[Min988]

Engine:
- Injen CAI, tb bypass
- NRG Inovation Earthing Kit
- Spoon and Mugen socks
- Mugen 1.3 Bar Radiator Cap

Wheels & Tires:
- ContiSport Pro Contact 2 / RE050A Potenza 225/45/R17
- 17'' Intergra Type S Rims
- Chrome Valve covers

Brakes&Suspension:
- Hawks HPS pads fronts and rears
- RDA slotted rotors
- Blue high temp paint.
- Whiteline RSB 18mm
- Cusco Front strut brace
- Skunk2 Lowering Springs 1.75/1.5in

Exterior & Interior:
- Apexi RSM with G sensor
- Honda OEM Factory Full Kit.
- Honda OEM Floor Mats
- White LED Parkers & Side door
- Phillps Crystal Vision 4300k Fogs
- Pimping Gold Badging
- De-winged
- Tinted reverse lights

Stereo:
- Alpine Mono MRP-M450
- Alpine Type S 12' Sub

[acura_ek1]

Gruppe M intake
N+ Buddyclub Coilovers
Works Emotions Xd9 18x8 offset +45
Toyo Proxies4 225/40/18
OEM Modulo front/sides/rear kit
Euro R front grill
Spoon socks
Spoon Titanium Knob


Will post picks soon!!!

[Dru42]

Gruppe M intake
N+ Buddyclub Coilovers
Works Emotions Xd9 18x8 offset +45
Toyo Proxies4 225/40/18
OEM Modulo front/sides/rear kit
Spoon socks
Spoon Titanium Knob


Will post picks soon!!!

sorry to hijack but how do u find the N+ coilovers?? good comfit ride??

[acura_ek1]

there great!!! only been in for less than a week haven't really settled down yet, but handling is awesome and very comfy, worth the coin!!!

[sports06]

K+N TYPHOON CAI
Custom Stainless Headers
Custom Stainless D&T exhaust
Tein SS Coilovers

[enkay]

damn ppl we got some mad euros here =P
J's racing CFRP intake
maxim works header (currently uninstalled plan to get hiflo cat too)
nst pulley kit (getting installed soon)
cusco strut n lower arm brace
whiteline rsb
mugen short shifter
acura 17" wheels

[curik]

k20a conversion

I wish...

[BusterSonic12]

mmm mods show off thread :p:p i like i like!!

my ex- '06 euro lux + satnav :thumbsup:

EXTERIOR
- Euro-R grille
- Euro-R badge (F&R)
- Euro-R rear bodykit
- Spoon style spoiler

INTERIOR
- Euro-R pedals
- Defi BF gauges
(oil temp, oil pressure, intake mani)
- Defi controller unit II
- Apex'i Neo piggyback ecu

SUSPENSION & STOPPIN' ON
- Tein SS suspension
(with pillowball upper mount)
- Cusco front strut bar
- ADVAN AD07 tyres
- Endless SS-S brake pads
- Ingalls rear camber kit

PERFORMANCE
- Comptech cold air intake
- HKS silent hi-power catback exhaust (dual outlet)

ENGINE BAY
- Spoon reservoir socks
- Pivot Raizin volt stabilizer
- Custom, earth terminal w/ 4G cables

LIGHTING
- OEM HID (low beam)
- Mtec cosmos blue white H1 4750K (hi beam)
- Polarg shinning wizard H11 5000K (fog lights)
- Mtec ice cold LED (parker & licence lights)
- Blue LED (dome & door light)

[Cranial]

Suspension/Wheels/Brakes
• Tein Flex coilovers
• Cusco Front Strut Bar & Lower Arm Bar II
• Whiteline Rear Sway Bar
• Ingalls Rear Camber Kit
• 18” Work wheels
• 225/40-18” Falken
• Rays locking nuts
• DBA4000 front slotted rotors
• Endless SSS front brake pads

Drivetrain
• Honda DC5R LSD
• J’s Racing 5.125 Final Drive set
• Custom lightweight flywheel
• Exedy heavy duty clutch
• Comptech Short Shifter

Audio
• Sony MEX-5DI head unit
• Sony 10 disc CD/MP3 changer
• MB Quart Discus front splits
• Rockford Fosgate Punch 6x9” rear speakers
• Rockford Fosgate Punch 4 channel amp
• Clarion 2 channel amp
• 12” Pioneer subwoofer in box
• Stinger RCA leads
• Dynamat in doors and boot

Others
• J’s Racing Torque Damper
• 6000k HID
• Tinted windows
• DC5 gear knob
• LED interior lighting
• K&N panel filter

[aaronng]

Please blank out your plates if you take pics. This thread can provide a thief with a hit list.

Engine:
Hot air Cat-take
Ghetto™ airbox
Vibrating enhancement damper
Scraped muffler

Handling:
Blown shocks
Tofu pads

Looks:
Scraped bumper
Ground down aero fins
Smashed tissue box

[johnprocter]

anyone got short ram intake for their euro?

[EuroAccord13]

anyone got short ram intake for their euro?

I used to run a K&N Typhoon CAI, then SRI, now I'm running an ART SRI with my RBC Manifold...

[honki3rider]

i MUST see aaronng euro at the euro meet next week
specs make it seem beasty.:p

[WIL70S]

Hey pumped

how much you get your ozzy racing volknova wheels for?

[aaronng]

i MUST see aaronng euro at the euro meet next week
specs make it seem beasty.:p
My tissue box is almost at the end, I'll keep it in the car to show off. :p

[aaronng]

anyone got short ram intake for their euro?
I have a short ram. Didn't like it, so I turned it into a cold air airbox.

[stephen8512]

ahhhh how i miss my euro.... when she was in her prime i had..


INTERIOR:

- Factory Leather Trim
- S2000 Titanium Shift Knob
- Euro R Pedals
- All interior light changed to white LED


EXTERIOR:

- Debadged "Accord" and "Euro"
- Euro R Matching Colour Hood Trim
- Mugen Front Bar
- Mugen Sideskirts
- Mugen Rear Bar
- Mugen Spoiler
- 15% Black Tints
- 35% Black Tint Film on Front and Rear lights
- RAYBRIG white LED parkers
- Philips Diamond Vision 5000K Hi beams



ROLLIN' ON:

- 20" AME Modelart Chrome
* Front - 20x8.5
* Rear - 20x8.5
- Hankook Ventus V4 ES
* Front - 225/30Z/R20
* Rear - 225/30Z/R20


STOPPIN' ON:

- ENDLESS Brake Pads
- DBA 4000 Rotors
- APP Steel Brake Lines


SUSPENSION:

- Tein Type Flex with EDFC Controller
* Front - lowered 3 inches
* Rear - lowered 2.5 inches
- Cusco Type OS Front Strut Brace
- Cusco Type I Lower Arm Brace
- SWIFT rear sway bar


ENGINE/PERFORMANCE:

- Optima Yellow Top Battery
- Exedy Hyper Single Clutch
- PIVOT RAIZIN Volt Stabilizer
- Injen CAI with K&N Filter
- Maxim Works 4-2-1 Headers
- Greddy EVO2 Catback Exhaust
- CL7 Euro R Cat
- Spoon Short Shifter
- Spoon socks
- Mugen Oil Cap
- Mugen Radiator Cap
- I-Vtec cover painted in Candy Blue
- Spark plug cover painted in Candy Blue


http://i7.photobucket.com/albums/y294/stephen8512/Euro1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMG_0476.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMG_0533.jpg

http://i7.photobucket.com/albums/y294/stephen8512/N78342-1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/MyEuroMugenKit-09-1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/SP_A0055.jpg

http://i7.photobucket.com/albums/y294/stephen8512/1234-2.jpg

http://i7.photobucket.com/albums/y294/stephen8512/123-3.jpg

http://i7.photobucket.com/albums/y294/stephen8512/123456.jpg

http://i7.photobucket.com/albums/y294/stephen8512/12445.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMGP2125.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMGP2123-1.jpg

[mr747]

very nice steven

19" bbose wheels
tein ss suspension
whiteline rear sway bar
cusco sway bar
injen CAI
comptech short shift

[akina]

is the tint on the front and rear lights legal?
looks nice :thumbsup:

[hooyn]

bump !

[mr747]

updated

20in wheels
rear camber adj
tein ss suspension
whiteline rear sway bar
cusco sway bar
injen CAI
comptech short shift

[euro_tr4sh]

suspension and wheels-

d2 coilovers
18" fierro vivid w/ falken rubber

interior/stereo-

pioneer deh-p80rs head unit
morel supremo tweeters w/ custom a pillars
morel supremo 7" midwoofer
2 x butler tubedriver blue 2.150 2 channel amps
1 x DLS ultimate A6 mono amplifier
1 x image dynamics IDMAX 12D2v3 12" subwoofer
1 x 7" screen
brax 2 farad capacitor
brax power meter
custom solid copper distros, full custom boot install
(currently being re-done for auto salon)

engine-
spoon reservoir (spl?) covers :P

exterior-
mugen weather visors (still waiting for em)
28% tint all round

as you can see im not really into power/speed... which is why i bought a auto euro, just wanted a nice car to cruise in and listen to my tunes, hence the comprehensive audio set up (and its what i do for a living also :P)

[hooyn]

nice rims crapdaz ! pics when u get em on plz :P !!!!

[Crapdaz]

nice rims crapdaz ! pics when u get em on plz :P !!!!

willllllllllllllll do.... sigh taking forever though.

[LXRY]

SUSPENSION

Shocks - Koni Sports yellow
Springs - Eibach
Alignment Kits - Eibach rear and Eibach front
Cusco strut brace
Whiteline Rear swaybar

INTERIOR

7inch lcd screens (headrests)
Dvd player glove compartment

ENGINE

UNDECIDED ?????

EXTERIOR

Fog Lights.....MTEC 4750k Globes
White LED T10 parkers



TYRES
Michelin Pilot Preceda II


More to come...............

[aaronng]

Interior:
Smashed tissue box
Steering lock

Engine:
Vibrating engine
Scraped exhaust
Hot air Cat-take
Ghetto™ airbox

Exterior:
Scraped bumpers
Ground down aero fins

Suspension:
Blown shocks
Kerbed rims
Tofu brake pads

[EK Civic R]

quite a few modded euros, but hardly ever see any on the street.. Need to get out more...

Anywayz my list:

07 Lux Man Sat Nav
Honda modulo lip kit
Spoon coilovers
Spoon strut bar
Spoon front brake pads
Spoon Camber & Toe arms front & rear
Euro Sports rims wrapped in AD07s
Mugen front grille

Coming soon..
FD2R LSD (waiting for clutch & flywheel)
Rays G07WT (waiting for shipment to arrive)

[Crapdaz]

quite a few modded euros, but hardly ever see any on the street.. Need to get out more...

Anywayz my list:

07 Lux Man Sat Nav
Honda modulo lip kit
Spoon coilovers
Spoon strut bar
Spoon front brake pads
Spoon Camber & Toe arms front & rear
Euro Sports rims wrapped in AD07s
Mugen front grille

Coming soon..
FD2R LSD (waiting for clutch & flywheel)
Rays G07WT (waiting for shipment to arrive)

Mine looks bone stock on the outside besides the single outlet exhaust, if your ever around princes highway and city i'll be there as i normally drive to work. I think i am the only one in Sydney that i have seen with Bonnet protector and Headlight protectors. I feel special :thumbsup: :p

[akina]

6000k hid
euro r badges
spoon reservoir covers
swift swaybars
cusco tower strut bar
ingen cai
tein ss
buddyclub/fujitsubo catback
buddyclub rims
buddyclub radiator cap
camber kit
toda headers
hi flow metal cat

[Miz_II_Die_IV]

Hey there, just wondering the Hankook tyres... whre they noisy, i had the nankang NS2 and they seems abit noisy...



ahhhh how i miss my euro.... when she was in her prime i had..


INTERIOR:

- Factory Leather Trim
- S2000 Titanium Shift Knob
- Euro R Pedals
- All interior light changed to white LED


EXTERIOR:

- Debadged "Accord" and "Euro"
- Euro R Matching Colour Hood Trim
- Mugen Front Bar
- Mugen Sideskirts
- Mugen Rear Bar
- Mugen Spoiler
- 15% Black Tints
- 35% Black Tint Film on Front and Rear lights
- RAYBRIG white LED parkers
- Philips Diamond Vision 5000K Hi beams



ROLLIN' ON:

- 20" AME Modelart Chrome
* Front - 20x8.5
* Rear - 20x8.5
- Hankook Ventus V4 ES
* Front - 225/30Z/R20
* Rear - 225/30Z/R20


STOPPIN' ON:

- ENDLESS Brake Pads
- DBA 4000 Rotors
- APP Steel Brake Lines


SUSPENSION:

- Tein Type Flex with EDFC Controller
* Front - lowered 3 inches
* Rear - lowered 2.5 inches
- Cusco Type OS Front Strut Brace
- Cusco Type I Lower Arm Brace
- SWIFT rear sway bar


ENGINE/PERFORMANCE:

- Optima Yellow Top Battery
- Exedy Hyper Single Clutch
- PIVOT RAIZIN Volt Stabilizer
- Injen CAI with K&N Filter
- Maxim Works 4-2-1 Headers
- Greddy EVO2 Catback Exhaust
- CL7 Euro R Cat
- Spoon Short Shifter
- Spoon socks
- Mugen Oil Cap
- Mugen Radiator Cap
- I-Vtec cover painted in Candy Blue
- Spark plug cover painted in Candy Blue


http://i7.photobucket.com/albums/y294/stephen8512/Euro1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMG_0476.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMG_0533.jpg

http://i7.photobucket.com/albums/y294/stephen8512/N78342-1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/MyEuroMugenKit-09-1.jpg

http://i7.photobucket.com/albums/y294/stephen8512/SP_A0055.jpg

http://i7.photobucket.com/albums/y294/stephen8512/1234-2.jpg

http://i7.photobucket.com/albums/y294/stephen8512/123-3.jpg

http://i7.photobucket.com/albums/y294/stephen8512/123456.jpg

http://i7.photobucket.com/albums/y294/stephen8512/12445.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMGP2125.jpg

http://i7.photobucket.com/albums/y294/stephen8512/IMGP2123-1.jpg

[Miz_II_Die_IV]

Hey Crapdaz, any reason why the bodykit is sitting in ur room n not on the car???

[docker]

Mods.
Lightweight 18 inch Speedy Vertec VR5 Rims
Eibach ProKit
HKS Silent Hi Power Catback Exhaust System
18mm Whiteline Rear Sway Bar
UNORTHODOX RACING Underdrive Pulley (Ultra SS)
Gates Pulley Belt (V-Micro Ribbed Serpentine Belt - K070683)
MOMO Gearshift Knob – Sphere Black Leather/Chrome
MOMO Gearshift Boot
Endless Brake Pads (Front and Rear)
Injen Cold Air Intake with MR Tech (Polished)
Injen Hydro Shield (Black)
Black Security Window Tint
Ingalls Rear Camber Kit

[Crapdaz]

Hey Crapdaz, any reason why the bodykit is sitting in ur room n not on the car???

am going to get my mate to do it for me, his going to move workshops soon (waiting on council approval), but i'll see if he can book me in sometime to begin the install.

[EK Civic R]

am going to get my mate to do it for me, his going to move workshops soon (waiting on council approval), but i'll see if he can book me in sometime to begin the install.

Well looks like your car won't look bone stock soon.. hehe

[hooboy]

K&N Air Filter
Tein SS
Endless Break Pads
Weds SA-70
6000K HID
Front Focal Splits, Rear Focal 3 Ways, Powered with PHD 4x75 RMS
JL Audio Sub W3 Powered with JL Audio Amp.

I think thats all it is.

[LXRY]

request for sticky for this thread ;)

[Suntzu]

First Mod: Insert Talented and Humorous Ace Steerer Behind wheel - Check!

The Rest:
Tein SS Coilovers
Whiteline RSB
Euro-R Front Grill
Comptech Ice Box with K&N Filter
Topspeed Stainless Steel Quality Premium Race SuperDooPa Header
300 Cell Ceramic Cat
Endless Brake Pads ( Spell it right damnit!)
Skunk2 extra hot and sometimes freezing Gear KnOB
Jtune Mild Flash - Vtec at 5000rpm and other goodness that mostly in my head
18 x 7 Speedy Lite gold Alloys with GForce tyers ( yes the same tyres as the Phoenix in Gforce (Tm) Tv Show


Some other shit i forget or havent installed like a Hondata Heatshield Gasket..but I digress..

[Crapdaz]

Performance
UR pulley kit
Ingalls Engine Torque Damper
Mugen Short Shifter Assembly
AEM SRI/CAI w/ Injen Hydroshield (Removed) to K&N Apollo CIS
P2R + Hondata IM Gasket + TB gasket
DCSports Header
Random Tech Catalytic Convertor 200cell
5zigen Pro Racer Catback Exhaust 2.5"
K20 (RBC) Intake Manifold

Suspension
Ingalls Rear Camber Kit
Moogs Endlinks
Tein MFP Coilovers + EDFC
Progress RSB
Cusco Front Strut Tower Bar Type OS
Cusco Lower Arm Bar Type I

Wheels/Brakes
Hawk Brake Pads
Powerslot (Slotted) Rotors
RAYS Gramlights 57 Maximum TA 18x7.5 +43
5zigen Pro Racer Gunmetal Lugs
Dunlop SP Sport Maxx 225/40/18

Miscellaneous
Custom, earth terminal w/ 4G cables
Spoon Socks
Mugen Oil Cap (Red)
Pivot Raizin Earthing Stabilizer Kit
Sparco Globe Gearknob
Cusco Oil Catch Can
Alpine HU CDA-9884E
Tint (18%)
LED (parkers/rego/boot/courtesy door/maplight/rear cabin)
K&N Oil Filter

To be done
Luckstar or Raven Bodykit
Greddy Emanage Ultimate w/ Boomslang Harness

[enkay]

ppl with brake upgrades, how are they holding up, any signs of warpage or shaking of steeling wheel etc etc haha
just wondering as im currently in the act of saving for an upgrade of brakes haha

[EUR003act]

hmmmm i think i need to start typing up my list now... hopefully itll be finished by the time i get my head fitted :p hehehe

damn crapdaz! i didnt realise ud done so much to yours! :thumbsup::thumbsup:

[Crapdaz]

nah mate nothing as much as yours, internal stuff like head and IM etc.

your list is going to be loooooooooooooooooooooooooooong.

[aaronng]

Engine:
Hot air Cat-take
Ghetto™ airbox
Vibration enhancement damper
Scraped muffler

Handling:
Blown shocks
Tofu pads

Looks:
Scraped bumper
Ground down aero fins
Cracked undertray
Smashed tissue box

[Crapdaz]

ghettoblaster euro in da house.

Engine:
Hot air Cat-take
Ghetto™ airbox
Vibration enhancement damper
Scraped muffler

Handling:
Blown shocks
Tofu pads

Looks:
Scraped bumper
Ground down aero fins
Cracked undertray
Smashed tissue box

[EuroAccord13]

Engine:
ART 3 Inch SRI + Apexi Pod
AaronNg Approved Ghetto Ram Air Tubing
Skunk2 V3 Stage 2 Camshafts
Skunk2 Titanium Retainers
Skunk2 Valve Springs
CL7 RBC Intake Manifold
Feel's ETD
Useless Pivot Grounding Kit
Various Piggyback ECUs
Toda Racing Headers
3 Inch Metal Cat
Skunk2 MegaPower Cat Back

Handling:
Tanabe Sustec Pro Coilovers
Ingall Rear Camber Kit
Cusco Front Strut Bar
Cusco 4 Point LAB
UR 4 Point Rear LAB

Braking:
PowerSlot Slotted Rotors
Hawk Ceramic Pads + Endless SSS + ART Carbon Metallic Pads
Edelbrock Braided Lines

Looks and Rice:
LED lights here and there
RayBrig Foglights
More LED lights here and there
Lights all over here and there
BMW E46 Lip Spoiler

[hooyn]

whered you get the feels etd from if you dont mind me asking euroaccord13 ?

[EuroAccord13]

whered you get the feels etd from if you dont mind me asking euroaccord13 ?

My mate went to Japan and I got him to get it for me while he was there.

[koray]

RIMS & SUSP:20" Lenso Granzo Rims
custom K-mac springs 2.5" front, 3" back
LOOKS:
5% black tints all round (soon to have 35% on front window)
led parkers
led numberplate lights
soon to have HID kit
SOUND:
2x 12" JBL subs, MTX 6x9 and 2 USA audio amps (soon to have MTX 6" splits)

[enkay]

lol updated my list
J's racing CFRP intake
maxim works header
xforce metal cat
nst pulley kit
cusco strut n lower arm brace
whiteline rsb
mugen short shifter
arc tit knob
acura 17" wheels

[aaronng]

^^ ARC tit knob? Does it feel like a tit or a knob?

[Crapdaz]

it's a tit and a knob combined.

[JunYu]

hey enkay, Strange how i just ordered the mugen ss and the arc knob!

lol, if it's not too much trouble, can you pm some pics of that setup? cheers.

[enkay]

haha yer no worries, at work atm so ill do it later on tonite
need to buy a shift boot adapter thou cos the stock one doesnt do it haha

[Type R Positive]

Theres nothing out for the CU2 yet. :(

[kitbkk]

:p
wondering why i havnt seen this thread before.
few mods here and there~~

ENGINE
Spoon Socks
Injen CAI
Buddy Club Condenser
JDM Red Rocker Cover
JDM Oil Dip Stick
J’s Racing Oil Cap
Spoon Radiator Cap
Fujitsubo Cat-back
Random Tech Cat
Spoon thermo switch
Spoon CF Sparkplug cover
Vision Exhaust Bushes
J’s racing magnetic drain bolt
UR Pulleys
Gate Belt
Greddy E-manage Ultimate (Not tuned yet)
Boomslang harness
ORC single clutch/flywheel kit (9.1 Kg)
Toda Header

HANDLING
Cusco Strut Bar
WhiteLine Rear Sway bar
Auto-Couture Rims 19*8.5/9.5 offset 41
Auto couture valve caps (yes! these focker are focking exxy)
Yokohama Advan Sports 235/35/19 V103
Vision front upper arms
Airrunner
Custom powder coated Air tank
McGard Lug and lock nuts

INTERIOR
DC5 Gear Knob
Comptech Short Shifter
JDM Euro R Pedals
Various Floor Mats (Made by Fabulous)

EXTERIOR
Kenstyle kit
6000k HID bulbs
HID 8000k fogs

BRAKE
Wilwood 4pot calipers
Wilwood pads
Wilwood 355mm 2 piece rotors
Goodridge line

ICE
Pioneer 8850 Head Unit
JL Audio Subs 12w6v2*2
Focals k2p
Alpine PDX 1.1000 and 4.150
Alpine SPR-69c
Yellow top battery
Custom Boot installation by GL Prosound

I think thats it:(

[raz05]

:p
wondering why i havnt seen this thread before.
few mods here and there~~

ENGINE
Spoon Socks
Injen CAI
Buddy Club Condenser
JDM Red Rocker Cover
JDM Oil Dip Stick
J’s Racing Oil Cap
Spoon Radiator Cap
Fujitsubo Cat-back
Random Tech Cat
Spoon thermo switch
Spoon CF Sparkplug cover
Vision Exhaust Bushes
J’s racing magnetic drain bolt
UR Pulleys
Gate Belt
Greddy E-manage Ultimate (Not tuned yet)
Boomslang harness
ORC single clutch/flywheel kit (9.1 Kg)
Toda Header

HANDLING
Cusco Strut Bar
WhiteLine Rear Sway bar
Auto-Couture Rims 19*8.5/9.5 offset 41
Auto couture valve caps (yes! these focker are focking exxy)
Yokohama Advan Sports 235/35/19 V103
Vision front upper arms
Airrunner
Custom powder coated Air tank
McGard Lug and lock nuts

INTERIOR
DC5 Gear Knob
Comptech Short Shifter
JDM Euro R Pedals
Various Floor Mats (Made by Fabulous)

EXTERIOR
Kenstyle kit
6000k HID bulbs
HID 8000k fogs

BRAKE
Wilwood 4pot calipers
Wilwood pads
Wilwood 355mm 2 piece rotors
Goodridge line

ICE
Pioneer 8850 Head Unit
JL Audio Subs 12w6v2*2
Focals k2p
Alpine PDX 1.1000 and 4.150
Alpine SPR-69c
Yellow top battery
Custom Boot installation by GL Prosound

I think thats it:(

That isnt a few mods

[EUR003act]

That isnt a few mods

hahaha i reckon!

impressive list!

daaamn i didnt realise there were so many guys that have done alot of performance work! :thumbsup::thumbsup::thumbsup: keep up the good work guys!

[aaronng]

^^ And all that is in a VIP style Euro!

[Euro08Jaz]

take out the air runner and rims and take that beast to the track.

[aaronng]

take out the air runner and rims and take that beast to the track.

The body kit will get ripped off if he goes off the track even once.

[LXRY]

:p
wondering why i havnt seen this thread before.....


Should be sticky so everyone can add to it will only encourage alot more activity here on the forum

[hooyn]

i agree. !

[enkay]

heres pics of the arc tit knob =P
http://img222.imageshack.us/img222/959/photo0090tg4.jpg
http://img222.imageshack.us/img222/3051/photo0092ct6.jpg
http://img508.imageshack.us/img508/295/photo0091fg4.jpg

[Crapdaz]

heres pics of the arc tit knob =P
http://img222.imageshack.us/img222/959/photo0090tg4.jpg
http://img222.imageshack.us/img222/3051/photo0092ct6.jpg
http://img508.imageshack.us/img508/295/photo0091fg4.jpg

Nice ****. :p

[Type R Positive]

Why qoute pictures man?

[aaronng]

Because he can.

[Rein]

Wheels & Suspension:

(WAS) Tein Flex Coilovers
Front 11cm drop
Rear 12cm drop
(NOW) Stock Suspension
(SOON) Air Runners
Euro Sport 17" rims

Lights:

MTEC 8000K HID low beams
MTEC 8000K HID fog lights


Ear candy:

Pioneer DEHP8650MP
Boston Acoustic front rear splits
Boston Acoustic 6x9
Alpine 12" type R sub and amp


To be fitted soon 2009:
15K worth of parts... drive down to melbourne, say hi to Atjo and kitbbk, take a few snaps and see who's is lower. hehehe

[Euro08Jaz]

The body kit will get ripped off if he goes off the track even once.

lol DIY weight reduction

[aaronng]

To be fitted soon 2009:
15K worth of parts... drive down to melbourne, say hi to Atjo and kitbbk, take a few snaps and see who's is lower. hehehe
With Air Runner, all 3 of you will be the same. The winner will be the one with the smallest tyres.

[hooyn]

15K worth ! ?
please share more.
or is the air runner 15K?
please share :)



Wheels & Suspension:

(WAS) Tein Flex Coilovers
Front 11cm drop
Rear 12cm drop
(NOW) Stock Suspension
(SOON) Air Runners
Euro Sport 17" rims

Lights:

MTEC 8000K HID low beams
MTEC 8000K HID fog lights


Ear candy:

Pioneer DEHP8650MP
Boston Acoustic front rear splits
Boston Acoustic 6x9
Alpine 12" type R sub and amp


To be fitted soon 2009:
15K worth of parts... drive down to melbourne, say hi to Atjo and kitbbk, take a few snaps and see who's is lower. hehehe

[Crapdaz]

air runners would cost about 4-5k.
I think. please correct me by PM.

[Rein]

air runners.. installed with cert is bout 6-7K.
19inch wheels and tyres about 4-5K
Exhaust 1.5-2K
Spoon Kit 3K

[Crapdaz]

air runners.. installed with cert is bout 6-7K.
19inch wheels and tyres about 4-5K
Exhaust 1.5-2K
Spoon Kit 3K
damn man, pretty crazy.

thought you were selling your euro?

[hooyn]

whats a spoon kit ?!?!?

[Type R Positive]

whats a spoon kit ?!?!?
It's a sweet looking bodykit! :cool:

[enkay]

the old phase kit.

[koray]

man, everytime i try to upload photo's it comes back as failed.. starting to shit me

[aaronng]

man, everytime i try to upload photo's it comes back as failed.. starting to shit me
Use imageshack.us to host.

[JunYu]

rightio guess it's my turn now!
Driving an 06 Graphite Euro Luxury with Sat Nav located in Melbourne!

Wheels + Suspension:

-18' Weds Sports SA70 in Blue light Chrome
-Bridgestone Potenza RE001
-Spoon Monobloc Calipers
-Blue Short Rays Lug Nuts
-Air runners

Performance:

-Fujita Cold Air Intake

Appearance:

-EuroR Front Lip
-Modulo Side + Rear Lip
-Mugen Visors

No pictures yet, will have some early oct :D

[aaronng]

Woo hoo, will be installing gauges soon.

[JunYu]

where will you be installing the gauges?

[.QD]

rightio guess it's my turn now!
Driving an 06 Graphite Euro Luxury with Sat Nav located in Melbourne!

Wheels + Suspension:

-18' Weds Sports SA70 in Blue light Chrome
-Bridgestone Potenza RE001
-Spoon Monobloc Calipers
-Blue Short Rays Lug Nuts
-Air runners

Performance:

-Fujita Cold Air Intake

Appearance:

-EuroR Front Lip
-Modulo Side + Rear Lip
-Mugen Visors

No pictures yet, will have some early oct :D

show us pix of your car man. you have airrunner now! i want to see it dumped.

[longers]

his car is quite low.
go wash it you lazy s**t :thumbsup:

[Crapdaz]

lol air runners @ exclusive in melb.
kekeke
melb = air runner gang

[JunYu]

lol, I actually don't have any pictures of the car yet, I want to have it perfect before i post pictures, i stopped longers from taking pictures too haha.

But yeah, i have to thank dan/ajto for getting the air runners for me! only took about a week!
And also Nick for installing them for me! great guy :D

[aaronng]

where will you be installing the gauges?

At home.

[longers]

i think he meant in the car :P

[d0p3y]

What's air suspension worth roughly?

[.QD]

What's air suspension worth roughly?

i think the new model of the airrunner is $5500?

[kitbkk]

rightio guess it's my turn now!
Driving an 06 Graphite Euro Luxury with Sat Nav located in Melbourne!

Wheels + Suspension:

-18' Weds Sports SA70 in Blue light Chrome
-Bridgestone Potenza RE001
-Spoon Monobloc Calipers
-Blue Short Rays Lug Nuts
-Air runners

Performance:

-Fujita Cold Air Intake

Appearance:

-EuroR Front Lip
-Modulo Side + Rear Lip
-Mugen Visors

No pictures yet, will have some early oct :D
cant wait!! will look awesome:thumbsup:
If you need a photoshoot done..i only charge a 6 pack of VBs LOL

What's air suspension worth roughly?
Dont get it man its no good:p

[d0p3y]

i think the new model of the airrunner is $5500?

Damn that's a lot of coin. I think I'll stick with the softest coil overs option.

[koray]

can we possibly make this a sticky? i love seeing what everyone has done to their car, it gives me ideas!!

[hooyn]

update.
wheels + suspension
work ed9 bronze 18x8's
red work nuts
upgraded rear sway
cusco front strut

performance
injen cai

looks
c/f mugen grill
18 tints

to come in next few months
orca clutch + flywheel
mugen lip kit 04
mugen visors

planned for distant future
todaheader
cat
exhaust
ecu
tune
(far far far way away)

[CL9R]

Engine:
- Grumppe M Intake
- 5 zigen Catback Pro Spec Exhaust
- Feels 4-2-1 stainless steel header
- X force Metal 'Cat hi-flow catalytic converter
- buddy club Oil Cap
- Spoon Sports reservoir covers


Suspension:
- Buddy Club N+ coil covers
- Whiteline rear sway bar
- Summit Front struct bar
- Cusco Lower Arm Bar 4 point

Wheels & Tires:
- yokohama S Drive 225/35/19
- 18" Rays Time Attact Wheels
- Rays Dustcaps

Brakes:
- DBA 4000 Series Rotors
- Project Mu B Spec Pads (Front)
- RBC (Rear)
Exterior:
- Euro R Front Grill, lip, side skirt and rear lip
- White LED Parkers
- EuroR Badge
- Boot Lip Spoiler
- Red H badge

Interior:
- 15% Black Tint
- Dynamat
- Type R Gearknob
-Euro R Boot Install
-Sports Pedals

[aaronng]

^^ Nice! Put your car on a dyno or on the track yet?

[EUR003act]

2003 Honda CL9 Accord Euro

Body:
JDM CL7 Euro-R front grille
JDM CL7 Euro-R emblem front grille badge
JDM CL7 Euro-R emblem rear badge
JDM DC5 Type-R rear red ‘H’ badge
JDM EP3 Type-R front red ‘H’ badge
CL9 Accord Euro badges removed
Honda OEM MY07 boot lid
Honda OEM MY07 tail lights
Honda OEM MY07 windscreen wipers
Honda OEM side skirts
Honda OEM rear under lip
MUGEN front under spoiler
MUGEN colour matched windscreen decal
15% Solarguard window tinting
Custom painted Silver bonnet trim
Custom black front bar grille
Custom black JDM style headlights
Custom black parklight lenses
Custom clear front indicators

Interior:
Honda genuine metallic silver dash trim
Honda genuine footrest and accelerator pedals
MUGEN brake and clutch pedals
JDM DC5 Type-R gearknob
JDM EP3 Type-R red ‘H’
SABER 60mm blackout oil pressure gauge
SABER 60mm blackout oil temp gauge
DRiFT 60mm black gauge cups
Gizzmo 2 Stage LED shift light
LC-1 wideband digital air/fuel gauge with data logger
KP Technologies window auto close module
KP Technologies alarm module
Custom shortened gearstick and modified leather boot

Performance:
Unorthadox Racing lightened/underdrive pulley set
Gates Micro-V high performance belt
TODA Racing CL7 EuroR headers
Metal Hi Flow catalytic converter
Comptech USA cat-back 2.5inch exhaust
-Custom flange matched to 60mm TODA pipe
Acura RSX Type-S K20Z1 cylinder head
-Portflow USA port and polished
-Full radius competition exhaust valve job
-Multi-angle competition intake valve job
-De-shrouded valves & polished chambers
-Surfaced deck to mirror finish
-Brass valve guides
Acura RSX Type-S K20Z1 valve springs
Acura RSX Type-S K20Z1 retainers
Acura RSX Type-S K20Z1 valves
Honda OEM CL9 25 degree VTC actuator
Cometic 0.030” competition headgasket
APR K20/K24 competition headstuds
JDM CL7 Euro-R RBC intake manifold
-Ported plenum inlet to 66mm
-Blended/Polished plenum
-Full runner port work/port matched
-Blended Runners
-Custom modded to fit J32A3 throttle body
-Custom modded to fit K20Z1 block
Acura TL J32A3 64mm electronic throttle body
-Ported 68mm inlet and 66mm outlet
-Polished butterfly and chamber
-Custom modded to fit RBC manifold
Power Rev Racing K20A3 thermal intake manifold gasket
Power Rev Racing K20A3 throttle body spacer
-Ported to 66mm
Autobahn88 Racing silicon CL7 Euro-R radiator hoses
MUGEN 1.3bar competition radiator cap
Mobil 1 SuperSyn full synthetic 0W-40 motor oil
Custom throttle body coolant bypass
Custom made 66mm K20A/J32A3 throttle body gaskets
Custom made 3inch aluminium short ram intake and cold air intake
K&N 3inch inlet 6.5inch hi flow pod filter

Engine Bay:
JDM CL7 Euro-R red rocker cover
JDM CL7 Euro-R spark plug cover
JDM CL7 Euro-R engine cover
JDM CL7 Euro-R bulkhead cover
SPOON Racing reservoir covers
MUGEN K20/K24 oil cap
GReddy oil sandwich plate adapter
Custom oil catch can

Suspension / Wheels / Brakes:
18” Advanti Blade 7.5” rims
BF Goodrich 225/40R18 SP sport tyres
Brembo cross drilled and slotted front rotors
Brembo cross drilled and slotted rear rotors
AXXIS ceramic composite brake pads
Custom painted ‘Racing Red’ callipers
Whiteline 18mm rear sway bar
Energy Suspension polyurethane front sway bar bushes
Energy Suspension polyurethane rear sway bar bushes
Pedders super low springs
Aluminium front strut bar


Lighting / Audio:
OSRAM 6000k D2S HID globes
Phillips 5000k H11 driving light globes
Phillips silver vision chrome indicator globes
ORACLE 8000k angel eyes kit
LED replacement globes throughout interior
Custom red and white LED centre console
Custom red and white LED buttons and switches
Custom 16 LED centre mount brake light
XCarLink Accord Euro MP3 module
2x ALPINE Type-R 12” subwoofers
2x Response 500WRMS amplifiers
Redtop 650CCA battery
Custom engine earthing kit
Custom boot sound deadening

[mr747]

^^^well thats a short list lol

[snYpz]

man thats a crazy list of mods!! mustve costed a fortune.

[EUR003act]

^^^well thats a short list lol


man thats a crazy list of mods!! mustve costed a fortune.

yeah it did...

lol i shouldve saved up :(

but my car is my hobby lol :thumbsup:

[Crapdaz]

that's crazy justin.

[Accord Basic]

Does anyone know the parts no.

DC5R LSD
FD2R LSD
CL7R LSD

Which LSD is the best and which one can fit on CL9? Are they different?

[aaronng]

Does anyone know the parts no.

DC5R LSD
FD2R LSD
CL7R LSD

Which LSD is the best and which one can fit on CL9? Are they different?

All 3 should be the same. You can fit the CL7R or DC5R LSDs. Not 100% sure about the FD2R.

[Accord Basic]

Thanks Aarong, I also found that
JDM INTEGRA DC5 RSX TYPE-R HELICAL LSD LIMITED SLIP DIFFERENTIAL
Can it fit on CL9? the seller told me it can fit on CL7 Jap spec. any different with CL9 Australia?

[integral90]

Drag your car EUR003act!

[Rein]

Update
Ive decided not to get air runners, my mechanic (Top One Automotive) convinced my not to get it simply because its a waste of money, poor handling and high maintanance. SO......

Here are the parts that ill be installing this November/December.
*NKB Elite 8 20x8.5 front and rear wrapped with TOYO T1R 235/30/20 front and 245/30/20 rear.
*TEIN Flex Coilovers
*Fujitsubo Exhaust
*Injen CAI
*2006 Euro Headlights
*2006 Euro Sports Grill
*2006 Front and Rear Bumper
*2006 Modulo Sports kit (front side and back)
and a few engine bay cosmetics

[felixd]

WOAHHH !!! thats gona b hawt ! ! ! ! ! !

[TRaNz]

Update
Ive decided not to get air runners, my mechanic (Top One Automotive) convinced my not to get it simply because its a waste of money, poor handling and high maintanance. SO......

Here are the parts that ill be installing this November/December.
*NKB Elite 8 20x8.5 front and rear wrapped with TOYO T1R 235/30/20 front and 245/30/20 rear.
*TEIN Flex Coilovers
*Fujitsubo Exhaust
*Injen CAI
*2006 Euro Headlights
*2006 Euro Sports Grill
*2006 Front and Rear Bumper
*2006 Modulo Sports kit (front side and back)
and a few engine bay cosmetics

Despite the wheel sizes, your car still gonna be slammed like it used to be?
ANy pics of it now, like slammed? i miss it, looked awesome.

[aaronng]

Thanks Aarong, I also found that
JDM INTEGRA DC5 RSX TYPE-R HELICAL LSD LIMITED SLIP DIFFERENTIAL
Can it fit on CL9? the seller told me it can fit on CL7 Jap spec. any different with CL9 Australia?
It should fit with some shimming if required. I have that in my CL9 but it didn't require shimming.

[akina]

Update
Ive decided not to get air runners, my mechanic (Top One Automotive) convinced my not to get it simply because its a waste of money, poor handling and high maintanance. SO......

Here are the parts that ill be installing this November/December.
*NKB Elite 8 20x8.5 front and rear wrapped with TOYO T1R 235/30/20 front and 245/30/20 rear.
*TEIN Flex Coilovers
*Fujitsubo Exhaust
*Injen CAI
*2006 Euro Headlights
*2006 Euro Sports Grill
*2006 Front and Rear Bumper
*2006 Modulo Sports kit (front side and back)
and a few engine bay cosmetics

no headers to complete it?

[Rein]

no headers to complete it?

no money for it... even this is costing me a fortune... even just the wheel, a set of wheels can buy me air runners installed and engineered. i needed to take out a loan for this. =(

[Rein]

Despite the wheel sizes, your car still gonna be slammed like it used to be?
ANy pics of it now, like slammed? i miss it, looked awesome.

ill slam it.. but it wont be any less than 10cm from the lowest point.. ive had enough trouble from the cops before.. ive learnt my lesson... or maybe not.. depends how i feel once its installed. hehehe << seems like u got a new set of wheels.. wanna share us a pic? hahaha

[Rein]

It should fit with some shimming if required. I have that in my CL9 but it didn't require shimming.

Aaron do u work around the west area? ive been seeing you drove past in last 2 days in the mornings.., im in the silver euro with NKBs.. dont know if you saw me tho..

[aaronng]

no headers to complete it?

He's not after performance, seeing that he will be putting on 20" rims.

[JunYu]

loan :o that's hardcore!

can't wait to see the finished product by the end of december!

[Accord Basic]

anyone know what size of the metal cat I need? I have a 5 Zigen dual outlet exhaust with stock header? How good it can be just changing the cat? Can the comptech header good quality? can it just bolt on? Thanks

[Crapdaz]

anyone know what size of the metal cat I need? I have a 5 Zigen dual outlet exhaust with stock header? How good it can be just changing the cat? Can the comptech header good quality? can it just bolt on? Thanks

comptech header - YES!

5zigen exhaust - assuming its the pro racer.

Triangular flange 2.25"

[Accord Basic]

is the 2.5" x-force metal cat will do? or the hi flow cat is enough? Thanks

[felixd]

get the metal cat core cuz is more durable than the ceramic core hi flow cat

[Crapdaz]

get the metal cat core cuz is more durable than the ceramic core hi flow cat

agreed.

[Accord Basic]

Thanks all, I am going to buy the xforce metal cat and try to get the comptech header as well.

[Rein]

Update 09/02/09..
just a short list of mods done to my car. some of you may remember my last post. i had the NKBs.. well ive sold it and got the Enkeis instead. some people say i made a BAD decision letting go the NKBs but i think the Enkeis suit the car more. was going to change my bumper and lights to 06 model, but figured it'll cost too much, so i got the Euro-R kit instead.

Engine:
K24 Red Valve Cover
Mugen Carbon Spark Cover
Mugen Radiator Cap
Mugen Oil Cap
JDM Dipstick
Injen Cold Air Intake
Fujitsubo Legalis R Catback

Suspension and Wheels:
Tein Flex Coilovers
18 inch Enkei RPF1 TypeRC
(8.5 front and 9.5 rear) (offset 42+ front and 45+ rear)
Volk Racing Formula Set Nuts
Vision Camber Kit

Exterior:
Euro-R Front Lip
Euro-R Side Skirts
Euro-R Rear Lip
MTEC 8000K HiD Low Beam
MTEC 8000K HiD Fog Lights
MTEC LED Parkers
Rolled guards front and back
Resprayed side mirrors black


Audio:
not finished yet...
Boston Acoustics.

[johnprocter]

can u take a photo of the low beam HID's please?

[Rein]

can u take a photo of the low beam HID's please?

http://img183.imageshack.us/img183/8173/img4210qw3.jpg
http://img183.imageshack.us/img183/8697/img4204yl4.jpg

[johnprocter]

ahhh cheers mate think i seen your car in the city a few times lol do u have that tein badge?

[integral90]

Rein, how is the Fujitsubo Legalis R Catback? Did you notice any gains? Is it 2.5" or 2.25"? Also where'd you pick up the red rocker cover?

[Rein]

ahhh cheers mate think i seen your car in the city a few times lol do u have that tein badge?

yes with the TEIN badge.. but removed them now.. sick of it..

[Rein]

Rein, how is the Fujitsubo Legalis R Catback? Did you notice any gains? Is it 2.5" or 2.25"? Also where'd you pick up the red rocker cover?

im not sure wether its 2.5" or 2.25", dont really measure it. with gains.. not really.. feels like i have a stock exhaust on because its soo quiet. even when i floor it, u can barely hear it, most of the time all you hear is the intake screaming. and the red rocker cover, you can get those from JDMyard.

[hooyn]

update here too

engine:

cai and a feels catback


suspension
tein ss
cusco front strut
selby rear sway

exterior;
blacked chrome
grill
xd9's all around
red nuts


dassit.
to come:
header + cat
not gonna get a kit rather the smooth look when it's stock.

maybe a tune once im baller enough

[Crapdaz]

im not sure wether its 2.5" or 2.25", dont really measure it. with gains.. not really.. feels like i have a stock exhaust on because its soo quiet. even when i floor it, u can barely hear it, most of the time all you hear is the intake screaming. and the red rocker cover, you can get those from JDMyard.
rofl don't you even get a slight exhaust cabin noise inside?

i find i can hear my exhaust in the cabin slightly but outside i don't heard much either with my 5zigen ROFL!

[felixd]

The mods:

Topspeed headers
Buddyclub Prospec exhaust
Skunk2 Radiator cap
K&N panel air filter
Supercheap auto air breather (epic FAIL)
Derestrict air box - icebox
Skunk2 socks
Mugen oil cap
HID 6000k
Buddyclub N+ coilovers
18" Work VS-XX
Cusco Strut brace
Ingalls ETD
Modulo front and rear lip kit
OEM honda side skirt mud flap
Blackened grille and badges
Ingalls camber kit
07+ Fog light kit

[euRo.e]

Drift pod filter
Buddyclub N+ Coilovers
Blk Sports Grill
Work VSKF (not fitted)
De-Cat No Resonator exhaust :D


Mods to come:
Ecu
Cams
Garret T04b + Kit (still deciding)

[integral90]

Drift pod filter
Buddyclub N+ Coilovers
Blk Sports Grill
Work VSKF (not fitted)
De-Cat No Resonator exhaust :D


Mods to come:
Ecu
Cams
Garret T04b + Kit (still deciding)

I'd do all your mods before you think about ecu, saves you money in the end. Also I wouldn't bother with cams until you've properly done the exhaust and intake, but it's totally up to you, just giving an opinion :)

[adhunt99]

For those of you that have put new head units in, can you replace the factory one or do you put it below?

[Rein]

For those of you that have put new head units in, can you replace the factory one or do you put it below?

put it below.. =) both single din and double din..

[euRo.e]

I'd do all your mods before you think about ecu, saves you money in the end. Also I wouldn't bother with cams until you've properly done the exhaust and intake, but it's totally up to you, just giving an opinion :)

yeah truue you have a point, i was looking at a RBC intake throttle body but i like my exhaust! :D well i got the ECU already. It's a Greddy e-manage Ultimate. got it for cheap off a mate hehe!


what you think about the RBC TB?

[integral90]

yeah truue you have a point, i was looking at a RBC intake throttle body but i like my exhaust! :D well i got the ECU already. It's a Greddy e-manage Ultimate. got it for cheap off a mate hehe!


what you think about the RBC TB?

RBC is an intake manifold, not a throttle body. It's a good mod if you've done headers/intake/exhaust properly as well. If everything else is stock, or relatively stock I'd steer clear of it. I put mine on when everything else was virtually stock and all it did was suck the low and and give very little top end. Good mod though, but the more I drive the Euro with it the more I realise it hasn't been set up for high-rpm power.

Sell me your e-manage? :wave:

[johnprocter]

yeah truue you have a point, i was looking at a RBC intake throttle body but i like my exhaust! :D well i got the ECU already. It's a Greddy e-manage Ultimate. got it for cheap off a mate hehe!


what you think about the RBC TB?

BE A MAN... turbo your bad boy!!!

[Crapdaz]

goodluck with ecu management with turbo setup.

[euRo.e]

HAHA! whoops i meant intake manifold, yeah ive relise that too. It dsnt rev out much. i was looking at the K20A head conversion. i hear that cant keep the revs in VTEC too much. I duno if its true or false.


I just got the ECU for a good price off a mate hehehe! sorry bro not for sale.


HAHA! yeah i want to turbo it, just waiting on a mate upgrade his turbo and sell me his one, wich is the T04b.

[euRo.e]

goodluck with ecu management with turbo setup.

thanks bro! :D:D

[integral90]

HAHA! whoops i meant intake manifold, yeah ive relise that too. It dsnt rev out much. i was looking at the K20A head conversion. i hear that cant keep the revs in VTEC too much. I duno if its true or false.


I just got the ECU for a good price off a mate hehehe! sorry bro not for sale.


HAHA! yeah i want to turbo it, just waiting on a mate upgrade his turbo and sell me his one, wich is the T04b.

The Euro's stock intake manifold, the RBB has long thin runners designed for low end torque as they get rid of turbulence in the runners, but the RBC has short fat runners to cram as much air in the cylinder as possible, but also creates turbulence at lower RPM. This explains the power shifting up after RBC install. So yeah the RBC is much more suited to high RPM and VTEC. The K20 head should increase power everywhere as it just generally flows better. The actual head (without cams etc.) isn't really suited for any RPM more than another (correct me if I'm wrong).

There's a lot more involved in turboing than just having the actual turbo mate, do your research carefully :p

[giant_mongrel]

goodluck with ecu management with turbo setup.


thanks bro! :D:D



hahahahhahahaha

[integral90]

hahahahhahahaha

LOL be nice!

I reckon Emanage would just cope, if not he can always go K-Pro and sell me his Emanage :D

[jyh888]

wheres the best place to buy headers and catback in sydney/nsw?

[Crapdaz]

OH traders!

how much you spending?
if money is no object then TODA AU trader!
if money is an object then you could go cheapy Xforce headers from 'RACE NATION" but will need flex pipe replaced.

and goodluck on the waiting period.

[johnprocter]

LOL you and your "goodlucks" crapdaz =P

[Crapdaz]

LOL you and your "goodlucks" crapdaz =P
takes a bloody long time to get bodykits in mate.... :p

sometimes half a year depending on sourcing and shipping.

and for the other, there is no full compatible standalone ECU to keep all features of the euro.

[giant_mongrel]

i ordered, paid, shipped, landed, and cleared headers from the US in around 35 days.
bodykits, however, are a different story...

[Crapdaz]

one bodykit box can fit almost 10-15 asian blokes.

what headers did you get mongrel?

[giant_mongrel]

comptech...
man i had the biggest scare when i picked it up
i drove all the f'ing way there, spent an hour clearing it thru customs/tariffs/tax bs, then drove to the warehouse to pick it up. the guy uses the forklift, brings it, dumps it next to my car. then me and him just stare at the box, stare at the car, stare at the box, stare at the car. wasn't gonna fit.

20 minutes later, two seats down, headrests lying on the asphalt and three near misses on my roof, and we crammed it in. same day drove it all the way back thru city to other side of town to fit. lesson: borrow your mate's ute.

if i do get kit, not looking forward to logistics...

[Crapdaz]

comptech...
man i had the biggest scare when i picked it up
i drove all the f'ing way there, spent an hour clearing it thru customs/tariffs/tax bs, then drove to the warehouse to pick it up. the guy uses the forklift, brings it, dumps it next to my car. then me and him just stare at the box, stare at the car, stare at the box, stare at the car. wasn't gonna fit.

20 minutes later, two seats down, headrests lying on the asphalt and three near misses on my roof, and we crammed it in. same day drove it all the way back thru city to other side of town to fit. lesson: borrow your mate's ute.

if i do get kit, not looking forward to logistics...
bodykit box was around
length 2+ metres;
width 1metre ;
height 1+ metre.

mine got all delivered to my door...bodykit, headers and everything else besides small stuff where you occassionally have to pick up.

[giant_mongrel]

thought i'd try and save money and do it all myself... turned out ok, was just a biatch for a couple of days calling custom brokers and stuff

next time its coming straight to the door. esp if its kit.

[Crapdaz]

thought i'd try and save money and do it all myself... turned out ok, was just a biatch for a couple of days calling custom brokers and stuff

next time its coming straight to the door. esp if its kit.
how much in total just to get it in your hand?

coilovers going through customs and paying tax on it set me almost $400 on tax.

[giant_mongrel]

the guy i bought it off sent a second invoice claiming parts as less than $1000, saving on the extra tax/tariffs as these are set at the limit of $1000 by AU customs. clearance by broker was $100, freight handling/tariffs was $200. so yeah around $300 all up just for clearance, not including shipping. man just thinking about it im not doing that again for a while

[Crapdaz]

the guy i bought it off sent a second invoice claiming parts as less than $1000, saving on the extra tax/tariffs as these are set at the limit of $1000 by AU customs. clearance by broker was $100, freight handling/tariffs was $200. so yeah around $300 all up just for clearance, not including shipping. man just thinking about it im not doing that again for a while
rofl thats jipped.

damn im glad i got stuff before this crisis!
no tax on anything i bought for headers or pulleys and total was under 1k mark too only thing was my coilovers with edfc/motorkit and that set me back $400. The coilies were written @ 1100 or so too.

btw did you end up installing the gasket?

[giant_mongrel]

not yet, haven't touched anything for a month. can't find my wrenches and its been too hot and ive been too busy. this weekend maybe... i'll procrastinate tomorrow.

[euRo.e]

LOL be nice!

I reckon Emanage would just cope, if not he can always go K-Pro and sell me his Emanage :D

HAHAHA!

yeah i can do that!