EG fog light screw.

[jdm_kid]

anyone know what size the screw is to open the headlight of the foglight, and is it possible to change the bulb without taking the front bar cos i cbf lol

[rayb3na_]

could give u a hand one weekend if u want? cos i wanna do this too! lol

[bennjamin]

done this a few years back - its a very small phillips head Simon. Get a glasses screwdriver kit ( the tiny screwdrivers) and use a steady hand and WD40 , and you should be able to crack em open.
BTW it depends on how the foggies were installed ( IE oem or diy styles)

[jdm_kid]

done. u will need a special tool called Trox screw. the size its T20. this will allow you to dismantle the projector bulb. also take off the metal reflector for a HID and bright look :)
and yup u can change the bulbs without taking off the front bar.

[rayb3na_]

o so take off the fog light cover and then use the Trox screw to undo the lens cover?

[jdm_kid]

depends what you wanna do.

- take off housing cover. i used the trox scew to open the lens cover to take out the reflector that makes the lighting point to the ground.
- to change the bulbs take off the housing cover, and undo the 3 philips head screws, this will dismount it from the bracket and then you can take it out. turn to the back and you should see 3 small screws. undo those and the rest is easy to figure out lol

[rayb3na_]

ok thanks dude will try this when i get some lens paint too! =]