JDM 4-2-1 headers fit DC4?

[vkhaw]

hey just need a quick response whether a JDM 4-2-1 headers will fit to my teg.

got a Integra GSI 96 dc4 which i think is the B-series engines.. B18B2 (i gotta go check) or does anyone know what the dc4 engines are?

WILL IT FIT ???

[aaronng]

Wrong section. Moving to the Integra section

[Samm928]

yo, all b series headers will fit any b series car =)

[vkhaw]

COOLS thanks ill check my engine out..

[Q_ball]

JDM 4-2-1 headers?
Where did these come from... as in, what car did these headers come from?
Or are they imported new from somewhere?

[90xsi]

96 jdm spec came with 4-2-1
98 jdm spec came out with 4-1

[vkhaw]

JDM 4-2-1 headers?
Where did these come from... as in, what car did these headers come from?
Or are they imported new from somewhere?

have no idea.. just a guy selling me them and want to know if they fit the car??

[Q_ball]

96 jdm spec came with 4-2-1
98 jdm spec came out with 4-1

Im assuming an ITR when you say that...?

edit: ITR headers will fit, however i beleive theres some slight modifications to be had as a DC4 exhaust is 2" whereas the ITR is 2.25"

[tRipitaka]

have no idea.. just a guy selling me them and want to know if they fit the car??

why don't u post the brand/name of the actual headers, and we'll be able to help you..

but the general rule of thumb, b-series extractors (for b18) should fit any b-series engine..

but if they're made for b16 (depending on model), sometimes they won't clear the block of the b18

[EKVTIR-T]

but if they're made for b16, they won't clear the block of the b18

I used em1 b16 headers on a b18 and it cleared fine.

[tRipitaka]

I used em1 b16 headers on a b18 and it cleared fine.

sorry.. edited*

[vkhaw]

Im assuming an ITR when you say that...?

edit: ITR headers will fit, however i beleive theres some slight modifications to be had as a DC4 exhaust is 2" whereas the ITR is 2.25"

is this true??

do you know if its a lot of work if the piping is 2" to 2.25"?

[Tegzieboi_BAR]

Good post! All my queastions answered w/out me askin a thing! :D

[tRipitaka]

is this true??

do you know if its a lot of work if the piping is 2" to 2.25"?

if you're planning to get your "fujitsubo" exhaust, and run ITR headers, you'll need to fabricate a new cat, or use a jdm cat..
so whatever happens, the exhaust shop you'll be doing it at, will be able to modify a cat to your setup.

[dslt]

These headers are coming off my car, which is the jdm dc2r headers 4-2-1 =)

[jdm_kid]

same as audm itr 4-2-1

[vkhaw]

hey i just checked my engine ..

its a B18B2 and im getting a JDM ITR headers 4-2-1..

FINAL QUESTION for post! WILL IT FIT??

[EKVTIR-T]

hey i just checked my engine ..

its a B18B2 and im getting a JDM ITR headers 4-2-1..

FINAL QUESTION for post! WILL IT FIT??

Yes but as tripitaka was saying the jdm header will be shorter so you will run into trouble there and the donut flange will be bigger and not match your audm cat.

[jdm_kid]

YES WILL FIT lol B series all same. just different at the donut flange n size etc.

[bennjamin]

just take it to a shop and let them do the rest. It will fit :D



PS its not worth it. A JDM SiR / 96 spec ITR header is 4-2-1 , and exactly the same as the AUDM 4-2-1 header. No point IMO just keep your stock b18b header.

[EKVTIR-T]

or buy my 4-2-1 headers here :) http://www.ozhonda.com/forum/showthread.php?t=87343

[vkhaw]

just take it to a shop and let them do the rest. It will fit :D


PS its not worth it. A JDM SiR / 96 spec ITR header is 4-2-1 , and exactly the same as the AUDM 4-2-1 header. No point IMO just keep your stock b18b header.

hey yeah i wasnt goin to n save some money on the cat..
but the guy is giving me his away 100 bucks thats damn cheap. from 300 to 100. why not. wouldnt u.. can use it for other hondas too

[Samm928]

i recommend for the cat to be 2.25 or 2.5 anything above 2.5 is too big for a dc4 b18b setup unless you go turbo where you need a 3" cat.

if tis a 2.25 or 2.5 then they might need to reweld flanges but yeh man it will all fit :) just get 2.25 or 2.5. might cost extra $10-20 for each flange but your still saving $200 from a $300 b/new cat :) have fune dude