connections
13-04-2008, 08:33 PM
Ok After seeing my old headlights were all faded and looking crap, I thought it was time for something new and sexy, so after thinking its not worth it sanding them back with 4000 gritt paper I purchased some eBay halo integra head lights 94-97 MODEL, im sure 97-2001 is the same process of installation but check with your forum people first.
Firstly you need to take off the front bar it involves
Bolts for the front bar are located along the top of the radiator support, and also in the front half of the wheel arches and also underneath the front bar their are two holding this plastic thing up.
bumper bar off looks like the following -
http://img410.imageshack.us/img410/5594/photo0025at3.jpg
front bar off, also you ahve to take off the parking lights 2 pc light aswell two bolts pretty standard.
http://img510.imageshack.us/img510/1540/photo0026vl9.jpg
old light all faded remove the old lights pretty basic just unplug them and then unscrew them pretty basic.
http://img510.imageshack.us/img510/7228/photo0027gx4.jpg
hooking up halo lights to the STOCK parking lights on you car
2 red wire to 1 parking light red wire,
2 white ground wire to 1 black ground wire on parking light ..twine the wires together or solder them if you want then cover in electrical tape.
http://img184.imageshack.us/img184/7230/photo0035lb7.jpg
new lights botled into stock mounts pretty basic...
http://img134.imageshack.us/img134/4439/photo0038ic4.jpg
new headlights in fit pretty much as standard front bar not fully aligned as all screws not in yet, just align it all and then make sure its all looking correct, you may have to play around with screws to get it straight.
http://img146.imageshack.us/img146/8223/photo0039ii9.jpg
passenger side headlight
http://img170.imageshack.us/img170/1223/photo0053pe0.jpg
front bar not on correctly yet ect ect
http://img170.imageshack.us/img170/8610/photo0056qn0.jpg
problems during install -
the only problem was a faulty globe in one of the lights,
considering their were no instructions with these lights I did ok.
cam pics of halos
http://img444.imageshack.us/img444/5161/blue1ma2.jpg
http://img529.imageshack.us/img529/4629/blue2pa7.jpg
http://img512.imageshack.us/img512/137/blue3vj7.jpg
mobile phone pics of lights
http://img291.imageshack.us/img291/7522/photo0063tj0.jpg
http://img291.imageshack.us/img291/5768/photo0060to9.jpg
http://img201.imageshack.us/img201/2257/photo0059tm8.jpg
WARNING I take no responsibility if you stuff this up if your a totall newbie don't try this at home, ask a mate or something.
thanks.
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Firstly you need to take off the front bar it involves
Bolts for the front bar are located along the top of the radiator support, and also in the front half of the wheel arches and also underneath the front bar their are two holding this plastic thing up.
bumper bar off looks like the following -
http://img410.imageshack.us/img410/5594/photo0025at3.jpg
front bar off, also you ahve to take off the parking lights 2 pc light aswell two bolts pretty standard.
http://img510.imageshack.us/img510/1540/photo0026vl9.jpg
old light all faded remove the old lights pretty basic just unplug them and then unscrew them pretty basic.
http://img510.imageshack.us/img510/7228/photo0027gx4.jpg
hooking up halo lights to the STOCK parking lights on you car
2 red wire to 1 parking light red wire,
2 white ground wire to 1 black ground wire on parking light ..twine the wires together or solder them if you want then cover in electrical tape.
http://img184.imageshack.us/img184/7230/photo0035lb7.jpg
new lights botled into stock mounts pretty basic...
http://img134.imageshack.us/img134/4439/photo0038ic4.jpg
new headlights in fit pretty much as standard front bar not fully aligned as all screws not in yet, just align it all and then make sure its all looking correct, you may have to play around with screws to get it straight.
http://img146.imageshack.us/img146/8223/photo0039ii9.jpg
passenger side headlight
http://img170.imageshack.us/img170/1223/photo0053pe0.jpg
front bar not on correctly yet ect ect
http://img170.imageshack.us/img170/8610/photo0056qn0.jpg
problems during install -
the only problem was a faulty globe in one of the lights,
considering their were no instructions with these lights I did ok.
cam pics of halos
http://img444.imageshack.us/img444/5161/blue1ma2.jpg
http://img529.imageshack.us/img529/4629/blue2pa7.jpg
http://img512.imageshack.us/img512/137/blue3vj7.jpg
mobile phone pics of lights
http://img291.imageshack.us/img291/7522/photo0063tj0.jpg
http://img291.imageshack.us/img291/5768/photo0060to9.jpg
http://img201.imageshack.us/img201/2257/photo0059tm8.jpg
WARNING I take no responsibility if you stuff this up if your a totall newbie don't try this at home, ask a mate or something.
thanks.
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!