PDA

View Full Version : TF035 Turbo off a subaru forrester



beeza
15-04-2008, 01:37 PM
Does anyone know if this is a good Turbo? It would be for my d16y4 96EK1 Civic Sedan.It looks small but he said it was the equivalent to a T3 Turbo...
Cheers!

JasonGilholme
15-04-2008, 02:08 PM
get a second hand gt28** if you have the money.

if not alot od people use subaru/mitsubishi turbos

beeza
15-04-2008, 02:16 PM
Cheers Jase!

beeza
15-04-2008, 04:23 PM
I can get it for $30 with the other bit attached to it,not the manifold lol

SiReal
15-04-2008, 04:33 PM
Mate, its $30. Even if you don't use it, its good to have as a paperweight. :thumbsup:

Also the you'll need to get a new manifold anyway to make it fit your engine.

beeza
15-04-2008, 04:40 PM
haha,yeah definately!

Limbo
15-04-2008, 05:00 PM
i've got a write-up of a b16 running this in the US. Theirs came a differnt car can't rem which. It was apparently fine. It had the smaller rear but was maxed out at like 16PSI.

The only issue you have is the manifold setup.

I'd stick to a garret or mitsubishi as they have better quality turbos and better support. Also if you need to rebuild it you are gonna need access to parts and i never heard of much in terms of parts unless your gonna goto ford? Which could cost you.

beeza
15-04-2008, 05:05 PM
Thanks Limbo! So it works! How much are the Garret or mitsubishi Turbo's?
If it does fail,I could just swap in another couldn't I?

[[d a n n y]]
15-04-2008, 05:17 PM
wats a ford forrester?

beeza
15-04-2008, 05:28 PM
A 4wd,2.0L I'm pretty sure.

aznpsuazn
15-04-2008, 06:58 PM
Subaru Forester.

beeza
15-04-2008, 07:45 PM
Yeah.It looks like it's the smaller stock turbo for them.An upgrade would be the TD04.

nd55
15-04-2008, 10:21 PM
> It looks small but he said it was the equivalent to a T3 Turbo

too generic.

If you gonna go a second hand.

1) Check the exhaust manifold pattern, that'll determine what manifolds are available.
Garret T3 and T25 are almost standards in the aftermarket world.

2) A very generic metric of turbo capability is the exhaust turbine outlet area.
Assuming small 4cyl engine:
5cm ^ 2: mild OEM type unit.
6cm ^ 2: quick spool
7cm ^ 2: hold on.
8cm ^ 2: running with EVO's

The turbo might be cheap, but it's only a small piece of semi-reliable build.

Nick.

kraiye
16-04-2008, 12:25 AM
$30!!
buy it any way and sell it for 5x the price
lol

[[d a n n y]]
16-04-2008, 11:17 AM
and change the title to Subaru forester please

EK1.6LCIV
16-04-2008, 12:25 PM
Go for it mate, hybrid styles ftw

beeza
16-04-2008, 09:15 PM
Yeah the TD04 or TD04L or the 2 nick said are the go.Great size/power description Nick!