Will DC2R rear LCAs fit on a EG ?

[joey99]

Will DC2R rear LCAs fit on a EG hatch without having to modify anything ?

I'm also planning on putting in the ASR brace and and ASR swaybar. Is the sway bar mounting points at the same place?

thanks guys

[90LAN]

says u have a eg6 already u wont need the dc2r lcas becos they come standard on your eg6
yes they do

[Sydsyd]

i use DC2R rear LCAs for my EG to fit stock DC2R sussy...they have the same holes for everything including swaybar mounting holes...

[joey99]

My EG is a GL so the rear LCAs don't have any holes in them at all for a sway bar. I'm looking for either EG Vti or Si LCAs but there's a DC2R LCAs for sake right now. so if they fit .. I'll get them. .. but I just need to make sure that everything will fit properly without having to mod anything.

I also read somewhere that EG has a ball joint on the shocks and the DC2R LCAs uses forks ? is that right ?

[jdm_kid]

DC2R LCA will fit perfectly. no mods at all. straight fit.

EG Vti/Si uses the FORKS, not ball joint. the DC2R LCA uses the ball joints

just get Vti/Si LCAs since you are only putting on the sway bar, the only reason u change the LCA is cos of the coilovers.

[joey99]

I've got stock shocks with spoon springs ... so will the stock shocks fit onto the DC2R LCAs ?

I"m guessing it might now if both the Vti and Si LCAs uses forks .. is that right ?

[Sydsyd]

no, it will not...

as jdm_kid was saying, the only reason u would use DC2R rear LCAs is when u're using DC2R shocks (stock or aftermarket)...

if u're just using stock EG shocks, just get stock EG Si/VTi rear LCAs...since they have holes to mount the rear swaybar...

[joey99]

good makes sense now :) thanks so much for the help guys :)

[TheSaint]

i didnt know EG6 was a GL... =/