View Full Version : CXI shift speeds
Rambo2
22-04-2008, 01:35 PM
hey all
i got a honda cxi 2000 ek civic and it doesnt hav a speed tachometer. at what speeds should i shift the gears to get maximum power without redlining the car?
i heard that it can shift 1st at 50kph, and 2nd at 85kph, 3rd at 130kph...
are these safe speeds?
vinnY
22-04-2008, 02:46 PM
i'd say they're redline speeds
generally rule i follow is every 20k's go up a gear for day to day driving
1st - 0-20
2nd - 20-40
3rd - 40-60 and so on
on cruising speed however i.e. highways between 70-90k's i generally keep it in 5th
aaronng
22-04-2008, 02:54 PM
Don't rely on the speeds to change gear. Rely on your ears.
vinnY
22-04-2008, 02:56 PM
i thought about replying with the same answer aaron but unfortuantely it doesn't answer the question he's asking
Rambo2
22-04-2008, 02:57 PM
i'd say they're redline speeds
generally rule i follow is every 20k's go up a gear for day to day driving
1st - 0-20
2nd - 20-40
3rd - 40-60 and so on
on cruising speed however i.e. highways between 70-90k's i generally keep it in 5th
oh ok, thanks for your reply
but i was referring to the optimum speeds for drag (on a track of course ;))
aaronng
22-04-2008, 03:00 PM
oh ok, thanks for your reply
but i was referring to the optimum speeds for drag (on a track of course ;))
If you are on a track doing drags, go and buy an aftermarket tachometer.
vinnY
22-04-2008, 03:01 PM
oh in that case i'll wait for someone with a cxi
if you're going to the track i'd invest in a tacho, the least you can do for your poor car just don't get one of those 10" ****off ones hehe
aaronng
22-04-2008, 03:29 PM
Rambo2, if you have the car's owners manual, they do list maximum speeds at which you should shift, and also regular speeds for shifting during normal driving.
BE-53-RS
22-04-2008, 04:19 PM
Its 1st-60
2nd-100
3rd-140
And idn the rest lol
But im sure bout them i used 2 have 1
Rambo2
22-04-2008, 04:21 PM
Cheers guys, yh i had a look at the manual and i did see the speeds
ive just heard that the car can b pushed a lot more without redlinin it
ive decided im definitely gonna get a tachometer installed so i can c it for myself :p
[ricer]
22-04-2008, 04:58 PM
Cheers guys, yh i had a look at the manual and i did see the speeds
ive just heard that the car can b pushed a lot more without redlinin it
ive decided im definitely gonna get a tachometer installed so i can c it for myself :p
get a cluster from a gli model
plug and play
AutoNoob
22-04-2008, 05:08 PM
wow im interested too.
i got a small sports exhaust and yet wen i rev, 50kmh in first sounds like its gonna break lol.
75kmh in 2nd car sounds ok - RAWR...hope i dont break it.
and 110kmh in 3rd sounds ok.
i got my own dodgy ebay installed tacho...reads 3000 rpm at 75kmh in 2nd gear!!! .. HOw can you know the rev meter signal is accurate? i feel its reving a lot higher than 3000 rpm...maybe not??
vinnY
22-04-2008, 05:12 PM
don't those aftermarket tacho's have a switch for 4cyl, 6cyl and 8cyl? sounds like its on the wrong setting mate
if the cxi's gear ratios are anything like the b16a's, then at 75 in second you'd be in excess of 5000rpm
phil3842
22-04-2008, 06:33 PM
i just installed an apexi rsm on my cxi. plus it gives you speed, revs and voltage just something to consider instead of just a tacho
mrwho
23-04-2008, 12:09 AM
How about a Apexi safc? Also has tacho and tunes your air and fuel mixtures for better engine response?
kraiye
23-04-2008, 12:39 AM
about 95 in second is rev limiter. hit 90 a couple times and listen to the engine. that will be your shift point ;)
60 in 2nd is about 4000rpm which is when my Y4 seems to start making power
AutoNoob
23-04-2008, 01:05 AM
don't those aftermarket tacho's have a switch for 4cyl, 6cyl and 8cyl? sounds like its on the wrong setting mate
if the cxi's gear ratios are anything like the b16a's, then at 75 in second you'd be in excess of 5000rpm
lol iC, kool i think it doesnt ...
i'll check 2moros.
LOL...the switch was like sunken so i didnt see it
makes more sense now...75kmh at 5000rpm sounds about right :) it was on the 6 cyllinder.. I really thought the cxi was 6!!!
Rehaan Khan
04-05-2008, 09:40 PM
hey all
i got a honda cxi 2000 ek civic and it doesnt hav a speed tachometer. at what speeds should i shift the gears to get maximum power without redlining the car?
i heard that it can shift 1st at 50kph, and 2nd at 85kph, 3rd at 130kph...
are these safe speeds?
srry bro but i think that too...
02gzm
04-05-2008, 10:07 PM
Go buy a GLi cluster and swap it in. It'll look better than an aftermarket tacho. It's pretty much just plug and play. There's a DIY in the DIY section explaining how to keep your speedo so you keep your odometer reading too. It's quite straight forward.
trism
05-05-2008, 12:03 AM
I really thought the cxi was 6!!!
i dont know if youre being serious or not
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.