PDA

View Full Version : clock not working



CER-15E
29-04-2008, 03:03 PM
hey guys, my clock isnt showing anythning.. i think i may have blown a fuse, does any body no where this fuse is located?? and wat kind of fuse it is??

hayashi_1986
29-04-2008, 05:31 PM
That particular fuse is located under the bonnet in the top right of the engine bay. Pull the black cover off and have a look at which fuse is blown. Replace and enjoy :)

I can't remember which specific fuse it is on the diagram though, check every one carefully.

SuiJin
30-04-2008, 12:54 AM
check under steering wheel, the same fuse for radio.
then check under bonnet, one of the spare fuse is blown.

dovla
30-04-2008, 08:16 PM
it should say on the black cover in the engine bay which one is for the clock. But also have a look under the staring wheel. there are usually spare ones there too.

Alexx
30-04-2008, 08:23 PM
Normally its the red 7.5amp ecu backup fuse in the engine bay fuse box that blows and takes out the radio and the clock.

The box is located up near the battery, and the fuse you want is second from the top left as you look towards the rear of the car

kairi_k
22-06-2008, 05:10 AM
7.5 amp fuse in the engine bay is likely to be the source of your problem.