ig2001accord
03-05-2008, 12:28 PM
Recently the fan has stopped working on 1 & 2 speeds but works on 3 & 4. Tested the switch which seems ok, the relay makes the right noises and the AC works even thought the fan doesn't. Honda mentioned a resistor that may have failed, but would need to "look at it" $$$ to diagnose. Anyone have any ideas or know where I could access a wiring diagram.
While I was in the dash, was able to replace all the globes that had slowly blown over the years. The best was the clock which Honda had suggested would take 1-2 hrs labour!! Takes less than 5 min.
While I was in the dash, was able to replace all the globes that had slowly blown over the years. The best was the clock which Honda had suggested would take 1-2 hrs labour!! Takes less than 5 min.