PNR888
05-05-2008, 11:18 PM
Hi, Anyone know how to remove the entire headlight assembly from the car? or anyone has access to workshop manual? (I tried hondatech website, nothing about 08 CR-V)
I was replacing my lowbeam H1 bulb, as I try to metal wiring connector to the end of the bulb, the thin round metal plate bulb assembly disassembled from the glass portion, and entire bulb get pushed into the projectile glass housing of the lowbeam light. As you know the slot which the bulb goes in is very narrow, and the access to the openning of the slot is very tight. (fuse box in the way). I thought the only way to retrieve the bulb is the remove the entire headlight assembly and then remove the lowbeam projectile glass housing to access that bugger.
I removed the front grille (top half, the part with H badge, but I don't know how to remove the lower part with 3 horizontal chrome strips), I undoned 2 screws on the top of headlights, but there seems to be something holding the lower part of the headlight assembly.
Therefore it would be appreciated if someone can tell me if there is another screw holding the light assembly from below? what other parts do I need to be remove and how?
Thanks
I was replacing my lowbeam H1 bulb, as I try to metal wiring connector to the end of the bulb, the thin round metal plate bulb assembly disassembled from the glass portion, and entire bulb get pushed into the projectile glass housing of the lowbeam light. As you know the slot which the bulb goes in is very narrow, and the access to the openning of the slot is very tight. (fuse box in the way). I thought the only way to retrieve the bulb is the remove the entire headlight assembly and then remove the lowbeam projectile glass housing to access that bugger.
I removed the front grille (top half, the part with H badge, but I don't know how to remove the lower part with 3 horizontal chrome strips), I undoned 2 screws on the top of headlights, but there seems to be something holding the lower part of the headlight assembly.
Therefore it would be appreciated if someone can tell me if there is another screw holding the light assembly from below? what other parts do I need to be remove and how?
Thanks