integra window installation

[GSi_PSi]

my car got broken into and i had to replace driver side window..
i got the window but now i have no clue in installing it...its very hard as you gotta keep both ends on the blackgrip while keeping the windows lil black holder thing on the track....is there any tutorial.found nothing when searchin ....help? also would a vti-r window fit a gsi?

[Tu88y]

Best to get someone who knows what they are doing....

In saying that first thing is take of the door trim clean out any excess glass you got around there. Then slide in the new glass but make sure its sitting on the sliders (CORRECT ME IF IM WRONG AT THIS PART). test the window by opening and closing it a few times and make sure it a line. Thats how I a line my window on my old car which wasn't power windows. I assume you got power windows

[Q_ball]

Yes, VtiR windows fit onto GSi.

[Tu88y]

another easier way out is to find another DC2/4 door in the same color and change that hehehehe

[vinnY]

^ problem with that is it'd be a pain to line up like factory again

regarding the window, its really a two man job
one to be behind the door looking into it and making sure it goes down okay and another to help guide the window from above down to the tracks
the windows are held in by two screws afaik

[JDM_VTIR]

^ yes that is correct. there are two bolts that you need to take off. it's a quite simple install. like vinny said it's a two person job.

just make sure everything lines up okay and ditto!

[GSi_PSi]

yeh guys lol it was so easy ...it was just a hinge that needed to be unscrewed and then you could line them both up properly. if anyone wants instructiosn or pics pm me

[Tu88y]

do a DIY write up