issues

[mr747]

Hi Guys
Todat i put 20s on my car with 225 35 20 tyres

and now the front right wheel on half a lock the tyre touchs the guard

Dramas errrrrrrrr

now what????
i need a front camber kit i think can anyone of you tech gurus help me

[aaronng]

How much is your car lowered by? Front stock camber is zero. So you could do with 1 or 2 degrees of negative camber in the front.

[mr747]

the left side of the wheel sits more in the guard more than the right
the tein ss are on the lowest setting

where do i get a front camber kit from cause you cant adj camber standerd correct???

[aaronng]

the left side of the wheel sits more in the guard more than the right
the tein ss are on the lowest setting

where do i get a front camber kit from cause you cant adj camber standerd correct???

Do you want it that low? :p
Front camber kit, have a look at the Vision kit.

[mr747]

how do people get them low and drive around
mine isnt the lowest going around

do you have links for the vision
im getting the alignment specs from today i will post them soon

[mr747]

guys L camber is .78 R camber is 1.07

[Uzzi]

You had 20s prior how come you did'nt have issue before?

i run 235/30/19 (rim 45 offset) and it only scrapes a teeny bit over dips. Mind you I run a finger gap between guard and tyre.

[mr747]

i had 19s my friend

[Uzzi]

ahh.....sorry my bad! Did you scrape before?

[Crapdaz]

did you roll your guards with 20's?

[EK Civic R]

Vision camber kit
http://www.technicasport.co.jp/eng/kit.htm


I think it's the same as spoon parts

[mr747]

yeah i rolled the guards this time aswell

im thinkn the tire shop has given me the wrong offset wheel im going back tonight to check cause im at work

given those camber specs below nothing really should have changed i think

[Miz_II_Die_IV]

hmmm... from my eperience you cant run 35 tyres... i had 35 on mine the ozzy tyres keep telling me it fit... roll ur guards... this n that... in the end i went bought new set or size 30... apparently u can drop it 2.5 inch without any rubbing... (source from TEMPTN)... he told me.... so yeah.. mine is 1.5 inch all round... on 20's

[mr747]

im gonna change to 30s my tyre shop just orderd them

[Crapdaz]

yeh, need some professional other than tempe tyres ozzy tyres so forth.
heard they just jam on any offset without further knowledge.

mr747 are you in sydney or melbourne?

[mr747]

im in melbourne now

[Onrmnd]

Bro i just got rob to lip the gaurds at suspension center in kielba

i was low with 20 X8.5 on 225 35 20 and it rubbed as soon as i had them fitted. As soon as i turn 1/4 it would grab the gaurd.

Robbie just lipped the gaurds and they were fine after that. He tucks the plastics over the lip and rolls it as the clips are the first thing to rub.

just letting you know.

[mr747]

NICKO i got lipped guards already bro and i still have issues

[Onrmnd]

thats a spin out!!!!

it's definetly the different off sets of the wheel or even the tyre brand i found plays a part. i have toyo's 225 35 20.

see how you go with the tyres.

even if you see robo he will give you good advice.

good luck

[kitbkk]

as some said, with 20" you will need to run 30's.

[mr747]

im putting 30 series on this week and let everyone know

nick pm me your number

[tknova]

im putting 30 series on this week and let everyone know

nick pm me your number

Once you put 30's on you'll be fine.

235/35/20 is way too big for the euro.

[mr747]

i hope so :)

[mr747]

all fixed thanks guys 30 series tyres fixed the problem

thanks again

[tron07]

I just wonder how your cars with 20" perform on the street...

Come for the cruise... can test acceleration there

[mr747]

i live in melbourne my friend how do you mean perform

[Crapdaz]

in terms, does it feel slower compared to stock etc.

[mr747]

seriously i have no idea feels same sh^& to me but maybe slower

im not after pace just looks for me