d series gearbox

[R_RaTeD]

hey guys my gear box is playing up
i have a d16y1 motor ...
just wondering if i could replace it with another d series gearbox or does it need to be for the d16y1 ?

any help or advice would be appreciated .
thanks !

[EK1.6LCIV]

what's the problem with it? details?

[hisoka]

yer any d series motor should do it, iam pretty sure,

atm my civic d16y1 does not go into reverse smoothly, usually crunches.

[kazam]

seems us d16y1 people have weak gbox's!!!!!!!!!! mines fudged up the ass 2!!!!!! and its really annoying, apparently it costs 1400 for a rebuild with new clutch, and 1000 for a 2nd hand 1 installed... fudge that lol car only cost me 5 grand im not paying that much juts for the gbox!

[nick_sixx]

dude everyone's d-series gearbox crunches going into reverse, just put it in a forward gear until the car goes back down to idle, then change it into reverse. and its like $400-$500 for a new gearbox, considering a full d16y1 engine+box is like $1100

[kazam]

wat do u mean a 'new' gearbox? the cars 14 years old, how'd u find a new gbox for it :confused:

[destrukshn]

wat do u mean a 'new' gearbox? the cars 14 years old, how'd u find a new gbox for it :confused:
from honda.
i got a brand new itr one from honda.
lol.

[R_RaTeD]

what's the problem with it? details?

i can't realli shift into 3rd gear properly ...
and my seconds is pops out when i turn hard to the right .... lol

i just want to be able to shift into third normally AHHA
and no my reverse doesnt crunch onli if ur moving forward as ur put it in reverse

wat to do wat to do ??

[Lukezen27]

Mine usually crunches into reverse

Thats normal if ya don't wait for the lower RPMs


i can't realli shift into 3rd gear properly ...
and my seconds is pops out when i turn hard to the right .... lol

i just want to be able to shift into third normally AHHA
and no my reverse doesnt crunch onli if ur moving forward as ur put it in reverse

wat to do wat to do ??

What state are you in mate?

[R_RaTeD]

Mine usually crunches into reverse

Thats normal if ya don't wait for the lower RPMs



What state are you in mate?

yeh same ...
in nsw dude
sydney ... to be more specific ...
u know how much an average d16 gearbox goes for ?

[R_RaTeD]

dude everyone's d-series gearbox crunches going into reverse, just put it in a forward gear until the car goes back down to idle, then change it into reverse. and its like $400-$500 for a new gearbox, considering a full d16y1 engine+box is like $1100

yo nick
wouldnt happen to know any places that have it do ya ?
i been lookin around at a few places
went to sumo's they didnt hav it
so yeh needa keep searchin

[Lukezen27]

yeh same ...
in nsw dude
sydney ... to be more specific ...
u know how much an average d16 gearbox goes for ?

Call Honbits out to Smithfield bro :thumbsup:

I think 300 to 400 bucks max....

You can buy motor + box for 500 to 700

[hisoka]

theres one on eBay...its 800 but he got new clutch and 150xxx kms on it so yer, 700 is average price,

also when i turn left hard and then change to 2 it starts jerking forward until i change to three ?

[tekung89]

lol wats wrong with crunching into reverse, is this happening while the car is at a stop? if so then dats really screwed

[EDCivicPunk]

dude everyone's d-series gearbox crunches going into reverse
Mine does also. Pretty much everytime, when i am stationary. It also crunches changing from first to second. What causes this, Clutch or Synchro gears? I wanna rectify it and was planning on getting a new clutch but have read a bit on here today and somewhere i read its the synchro gears. Which is gonna be a bitch to fix. Riley.

[R_RaTeD]

Call Honbits out to Smithfield bro :thumbsup:

I think 300 to 400 bucks max....

You can buy motor + box for 500 to 700

thank you very much buddy !:thumbsup:

[EG5[KRT]]

its pretty normal for reverse to crunch if car is not idling.. due to reverse having no syncro..

[Boban]

i picked up a gear box, clutch (used but still got life in it) and a flywheel from one of the members here on forum for $150. I haven't used it yet, my one is still going

[R_RaTeD]

i picked up a gear box, clutch (used but still got life in it) and a flywheel from one of the members here on forum for $150. I haven't used it yet, my one is still going


SELL IT TO ME !
lol