need help Fitting DC2 Foggies

[digital_tearz]

i got these pre face life foggies
dunno how they mount on the front bar
can sum1 help me. and also is there any relays for it? or should i jus hook it up straight to the battery wif a switch

[T-onedc2]

I'm pretty sure you need a relay, hopefully someone else can help

[IZY-10]

i can just 1 min

here this should help you abit. very easy to do. All you need is

30Amp wiring about 5m
1 30Amp relay
dc2 switch
spade connections

If you require any more help just post your problems and i will help you. Best way to mount them is to take your whole bar off and asses it from there


P.S I take it you got everything? if so give me a i-trader rating. Also the wiring loom i sent you has the relay already. All you need is constant +12v, +12v when lights are on, and Gnd.

[digital_tearz]

i can just 1 min

here this should help you abit. very easy to do. All you need is

30Amp wiring about 5m
1 30Amp relay
dc2 switch
spade connections

If you require any more help just post your problems and i will help you. Best way to mount them is to take your whole bar off and asses it from there


P.S I take it you got everything? if so give me a i-trader rating. Also the wiring loom i sent you has the relay already. All you need is constant +12v, +12v when lights are on, and Gnd.

i got the loom i know that there is a ground wire and a 12v power wire.
but there is a 3rd blue wire where does that go?

[IZY-10]

i got the loom i know that there is a ground wire and a 12v power wire.
but there is a 3rd blue wire where does that go?

If you want i can send you installation instructions of the switch. In the mean time this should help you out abit

http://www.honda-tech.com/zerothread/2194625

[digital_tearz]

If you want i can send you installation instructions of the switch. In the mean time this should help you out abit

what should help me i dnt see anything or link

[IZY-10]

red goes to 12v when lights are on
black is ground
relay also needs 12v