PDA

View Full Version : Dc2 Harness - Install


Melbz
22-05-2008, 01:33 AM
Installing harness into a dc2r

Got any recommendations on which way i should go about it?
Thinking 4" harness installing bar behind drivers rear passenger seat to mount it.

Anyone seen any good sites about it?
VTECMACHINE
22-05-2008, 10:26 AM
Is this for track or for the street. If it's for the street... don't bother with one. They are dangerous, and annoying.
mku01
22-05-2008, 12:43 PM
shouldn't be a problem even if it's for street.. just fold them to the sides so it's not in the way, and remember not to wear them otherwise good luck shoulder checking
Melbz
22-05-2008, 05:51 PM
Track use of course :P
At this stage I don't want to strip the interior but have the harness there for when i go track.
mku01
23-05-2008, 12:10 AM
yeah.. is it 4pt?
for the back strap, just slip it through the part where your seatbelt buckle goes through.. so police don't do u for stripping backseats.. that's wat i'm doing
VTECMACHINE
23-05-2008, 02:15 PM
http://img357.imageshack.us/img357/1392/img1921ac4gc3.jpg

I have mine like so... The bottom right clips into an eyebolt I put in. The bottom left, I bought a harness bracket from JDM Yard for like $20, and it clips onto there...

As for the rear, install eye bolts to the rear seats belts on the floor, and clip the harness into them.

Do not use the harness on the street... it's just plain dangerous.