hey guys

[bradess]

hey guys im 16 from sydney and own a 1992 Integra LS with a B16a Vtec engine in it. i get my p's in about a month and cant wait. im posting some pics so u can tell me how u think i could possibly improve the looks or performance of it.

thanks,

[JunYu]

looks nice and clean! how long have you had it?

[Jarkz]

:wave: Hey Bradess.....

Nice choice of ride.... I like the colour too.

You could either tinker with your B16a in a N/A way (cams, gears, headers & exhaust and so forth)

Search around, or post in the "Integra" section stating what can be done for your humble B16a.

Then there is the turbo route which the B16a responds well to also.

Again search or post & you'll find your answers.

As far as cosmetically most usually swap to the later 92-93 bar with the type R style lip...

That said JDP engineering make a nice lip for your 89-91 & 92-93 front bar.

(they slightly differ in style between 89-91 & 92-93 in style & there expensive unfortunately :( )

JDP on 89-91

http://i32.tinypic.com/2n7k3p.jpg


JDP on 92-93 (note EK civic side skits also)

http://i30.tinypic.com/w144eo.jpg


Type R style on 89-91 bar

http://i27.tinypic.com/125j43t.gif

Type R style on 92-93 bar

http://i28.tinypic.com/2a98mti.jpg



You can also fit an Accord CD5 94-95 model standard lip to your teg which looks good imo (nice & cheap also)

Only have pic on 92-93 bar, but can be fitted to your 89-91 bar

http://i31.tinypic.com/5n8xsy.jpg

Anyways welcome along & happy :honda:ering :thumbsup:

I think I deserve a rep point.... lol

PS: Traders & members can get you the Type R style lip, just post in the wanted to buy section buddy.

[bradess]

looks nice and clean! how long have you had it?

ive had it since december.. but im onky on my L's so it hasnt been driven much just to learn manual on.

[bradess]

:wave: Hey Bradess.....

Nice choice of ride.... I like the colour too.

You could either tinker with your B16a in a N/A way (cams, gears, headers & exhaust and so forth)

Search around, or post in the "Integra" section stating what can be done for your humble B16a.

Then there is the turbo route which the B16a responds well to also.

Again search or post & you'll find your answers.

As far as cosmetically most usually swap to the later 92-93 bar with the type R style lip...

That said JDP engineering make a nice lip for your 89-91 & 92-93 front bar.

(they slightly differ in style between 89-91 & 92-93 in style & there expensive unfortunately :( )

JDP on 89-91

http://i32.tinypic.com/2n7k3p.jpg


JDP on 92-93 (note EK civic side skits also)

http://i30.tinypic.com/w144eo.jpg


Type R style on 89-91 bar

http://i27.tinypic.com/125j43t.gif

Type R style on 92-93 bar

http://i28.tinypic.com/2a98mti.jpg



You can also fit an Accord CD5 94-95 model standard lip to your teg which looks good imo (nice & cheap also)

Only have pic on 92-93 bar, but can be fitted to your 89-91 bar

http://i31.tinypic.com/5n8xsy.jpg

Anyways welcome along & happy :honda:ering :thumbsup:

I think I deserve a rep point.... lol

PS: Traders & members can get you the Type R style lip, just post in the wanted to buy section buddy.


how do u know the difference between the 89-91 and the 92-93 front bumper?
thanks for ur help.

[Jarkz]

92-93 bar has one open front dam/air duct

http://i28.tinypic.com/2a98mti.jpg

89-91 bar has an open front air dam (with splitter) & 2 side air/brake ducts

http://i32.tinypic.com/2n7k3p.jpg

[Jarkz]

your car must be an early 1992 to have that bar... they changed to the 93 stlyle front bar in late 1992...

[EKVTIR-T]

But its got the 92-93 rear though with the 89-91 tailights.Oh well who cares,just strange thats all...

[bradess]

your car must be an early 1992 to have that bar... they changed to the 93 stlyle front bar in late 1992...

from memory i think it says made in march 1992...

[bradess]

But its got the 92-93 rear though with the 89-91 tailights.Oh well who cares,just strange thats all...

how can u tell the difference in the tail lights?

[EKVTIR-T]

how can u tell the difference in the tail lights?

Ok you may as well get up to speed since you're interested :)

See how yours are just clearish white and red.They are the early tail lights 89-91.
These are the later 92-93 lights.
http://www.tokyoae.com/products/DA%2092-93%202Door%20Taillight.JPG

[bradess]

Ok you may as well get up to speed since you're interested :)

See how yours are just clearish white and red.They are the early tail lights 89-91.
These are the later 92-93 lights.
http://www.tokyoae.com/products/DA%2092-93%202Door%20Taillight.JPG

ohk thanks.. not a huge difference then.

[EKVTIR-T]

I would suspect your car has had front damage and they put the older bumper on because the later model is too hard to find.
Also the side strips dont come painted from the factory so they have been painted at some stage.
And the rear lights might have just been swapped because some people prefer the ones you have now.Like me lol.I am using the same as yours on my 93.

[bradess]

I would suspect your car has had front damage and they put the older bumper on because the later model is too hard to find.
Also the side strips dont come painted from the factory so they have been painted at some stage.
And the rear lights might have just been swapped because some people prefer the ones you have now.Like me lol.I am using the same as yours on my 93.

yeh tha probably wats happened. u got any pics of ur car?

[EKVTIR-T]

http://i180.photobucket.com/albums/x229/JeffSiReal/20080323%20Arthurs%20Seat%20Cruise/mini-IMG_0765.jpg
http://img403.imageshack.us/img403/9017/picture002sz8.jpg

[bradess]

http://i180.photobucket.com/albums/x229/JeffSiReal/20080323%20Arthurs%20Seat%20Cruise/mini-IMG_0765.jpg
http://img403.imageshack.us/img403/9017/picture002sz8.jpg

looks nice.. wat size wheels u got there? u reckon i should take my spoiler off?

[EKVTIR-T]

16x7.5inch
Umm the spoiler is a personal thing really.You like it or you don't.
I just think our car looks smoother without it.But don't change it coz others say so.
If you like it just leave it :)

[bradess]

16x7.5inch
Umm the spoiler is a personal thing really.You like it or you don't.
I just think our car looks smoother without it.But don't change it coz others say so.
If you like it just leave it :)

i think i will take it off once i get my car lowered? urs is lowered yeh?

[EKVTIR-T]

Ye it is.The problem with lowering DAs is the underbelly of the car is already lower than other cars so when you lower it too much you will rub and scrape over speedhumps and driveways etc.
Sort of have to find a happy medium because they look crap when they are too high lol

[bradess]

Ye it is.The problem with lowering DAs is the underbelly of the car is already lower than other cars so when you lower it too much you will rub and scrape over speedhumps and driveways etc.
Sort of have to find a happy medium because they look crap when they are too high lol

how much did u lower urs

[EKVTIR-T]

The back is probably 3-4inches and the front maybe 2-2.5 inches roughly.

Heres some links for some ideas/inspiration
Here (http://www.honda-tech.com/zerothread?id=729316&page=1016)
and here (http://digitalhorizon-online.com/gallery/index.php)

[bradess]

The back is probably 3-4inches and the front maybe 2-2.5 inches roughly.

Heres some links for some ideas/inspiration
Here (http://www.honda-tech.com/zerothread?id=729316&page=1016)
and here (http://digitalhorizon-online.com/gallery/index.php)

thanks. u got stock engine?

[EKVTIR-T]

Ye.It does the job for me.I'm over the whole power pursuit thing lol.Getting old hehe

[bradess]

Ye.It does the job for me.I'm over the whole power pursuit thing lol.Getting old hehe

haha yeah.