View Full Version : Identification of header
vincikwan
23-05-2008, 02:47 AM
Hi guys, i was told that this is a spoon 4-2-1 header. It comes in 2 peice. A 4-2 part and a 2-1 part. Can anyone confirm this please?
Thanks.
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/spoon1.jpg
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/spoon2.jpg
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/spoon3.jpg
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/spoon4.jpg
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/spoon5.jpg
fatboyz39
23-05-2008, 09:23 AM
looks like modified stock ITR headers. Could be spoon.
primaries look too big for spoon
its an older generation of headers.. could be anything
no symbols tags or markings anywhere ?
ekhybrid
23-05-2008, 11:48 AM
that so looks like itr
vincikwan
23-05-2008, 12:43 PM
There is a jasma tag on the top. For spoon headers, many say that they do not have a spoon tag.
So a spoon header does not have a spoon tag, but its supposed to have a jasma number that i can email them to check or something. Not too sure about that.
im going to say thats an RSR header..
the old spoon headers dont have the spoon tag on it.
vincikwan
23-05-2008, 03:12 PM
Yup, i know that the old spoons do not have a tag on them....i hope thier not RS-R though...
its not a spoon one
spoon one has diff lengths.
http://www.modacar.com/Merchant2/graphics/00000002/ct_sport_42head.jpg
vincikwan
23-05-2008, 04:40 PM
I got this off from nengun.. it says spoon. Thats y i m confused.
http://i20.photobucket.com/albums/b238/JonCoopS/Spoon%20extractor/nengun-1316-02-spoon-4_in_2_exhaust.jpg
genkimashi
23-05-2008, 05:11 PM
send jasma an email....if u got a serial number on top of the header... they could help u to identify the maker of the header... tats how i got to find out mine....
vincikwan
23-05-2008, 05:36 PM
Righto...i think thats the only way then. Thanks
By the way, is this the email. Damn site is in jap...dont know how to read except for this line. info@jasma.org
xntrik
27-05-2008, 11:16 PM
its not a spoon one
spoon one has diff lengths.
http://www.modacar.com/Merchant2/graphics/00000002/ct_sport_42head.jpg
isnt that spoon headers for dc5?
these headers arent ITR headers.
I dont know what they are tho.
most probably dc5.. been looking at too many k20a parts.
vincikwan
28-05-2008, 12:21 AM
Still waiting for the headers to arrive, will be sending the numbers to jasma to get a confirmation. Post'em up when i get them.
vincikwan
07-06-2008, 07:50 PM
Jasma confirmed that they are spoon 4-2-1 headers. Bought then for only $400. :) Just got them bolted onto the engine and the test pipe fitted. The initial drive feels not too bad. Needs a tune i think.
bennjamin
07-06-2008, 09:14 PM
they are not 4-2-1 - they are only the 4-2 section. Spoon designed and sold the 4-2 section for the earlier 96-97 ITR and DC2s. IT reuses the old 2-1 section
vincikwan
08-06-2008, 02:19 AM
there is also a spoon 2-1 section.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.