F22B1 power ugrades.

[Jarkz]

Besides the usual Header, high flow cat & cat-back, is there alot to be hard with

cam, cam gear timing etc, & tune?

I found that AEM make an adjustable cam gear, any recommendations on a cam.

Any feedback to get the most out of it would be appreciated.

thanks......

[h22a accord]

you will et alittle bit but for the same money you could get a h22a

[040501912]

or turbo :p !! 250hp at hub 10psi

[d15z1SUX]

www.bisimoto.com

you can find cams for your f22b there. hes got a honda insight powered by a f22b doing 9 secs passes and making around 380 flywheel hp on methanol. but yeh i dont think you could hope for anywhere near that amount of power if you wanted it to be streetable.

[Jarkz]

Thanks guys but i want to stay N/A

I want to play with what I've got surely there is some pontenial in in the humble F22B1...

[SeverAMV]

actually, i think its just an f22a on high octane leaded fuel. bisimoto lists the events he's competed at on his website, a few of them are nhra drags. then look up the rulebook with regards to what fuels are allowed. then look up the fuel's details by the manufacturers. methanol blends are not listed as an allowed type of fuel, which means the power was made using lead based high octane fuel. so it is achievable, just costly to run on street.
plus, you dont need high octane fuel to make a lot of power. higher octane ratings just means the fuel is less prone to detonation. you can have you motor tuned to run with the fuel you are using, and you shouldnt make much less than bisi if you have the same setup.

anyway, back on topic. yes, there can be a lot to be had by cam and cam gear timing, but it depends a lot on your intake, exhaust, and your overall setup.

[d15z1SUX]

would be nice to see a n/a tuned f22b. think its non existent in australia.

[Jarkz]

Anyone know if a streetable cam/manufacture?

Can seem to find any?

looks like bisimoto is the only choice......?

[d15z1SUX]

yeh i think they are the only one to make one. or u can get sumwhere to do a custom regrind for u but i wouldnt know where.

[040501912]

got this site call f22b parts or something. go have a look at ebay us.

find them. they have lots sort of things for f22 from custom valve to bottom end.

[Mitchman]

stroke n bore to 2.6 keeping bore a bit bigger than OEM ratio n port thathead hardcore you'll have one torque accelerator on your hands it won't rev as high as others put it will pull like a batoutahell!!

[ALLMTR]

and you shouldnt make much less than bisi if you have the same setup.



No one in the world makes ANYWHERE near the power Bisi does with this motor.

d15z1sux: That motor makes a lot more than 380 flywheel

[d15z1SUX]

^^ serious? thats so crazy...

[Riviera]

the word on the street is that there is a CD5 - F22B1 getting a turbo upgrade at
gun performance.... now thats just the word on the street of course lol

wonder if theyre a member of zonda

[d15z1SUX]

word on the street is theres on in WA. lol.

[040501912]

:angel:

[CB7_OWNER]

The bisimoto one is a f22a from a cb accord...no vtec.. just sohc power!!

[trethus]

www.f22parts.com

some potential there...