View Full Version : Sways for EG
moo moo nel
24-05-2008, 08:11 PM
What size of sway bars (Front & rear) is the best for EG?
rayb3na_
24-05-2008, 08:20 PM
22mm front and rear
jdm_kid
24-05-2008, 08:21 PM
27mm front n 24mm rear
jdm_kid
24-05-2008, 08:24 PM
22mm front and rear
i believe 23 or 24mm is the standard size for the fronts on EGs
moo moo nel
24-05-2008, 10:10 PM
22mm front and rear
front and rear same thickness?
this is new to me...
bennjamin
24-05-2008, 10:27 PM
best ? Up to the driver behind the wheel.
Here is an idea of what works for me
24mm front swaybar , upgraded bushes
23mm rear swaybar - JDM 98+ ITR rear bar + ASR subframe brace.
Works well.
We normally run 24mm front , 22mm rear
22mm - 23mm rear sway bar on EG's will need ASR or beaks reinforcement kit.
moo moo nel
24-05-2008, 10:39 PM
as you know Yona I ran 26mm front and 22mm rear + ASR for my EK and I found it fun to drive in Wakefield...with a bit of oversteer
I heard they don't make 26mm front for EG...and with 24/22, will that create too much oversteer?
as you know Yona I ran 26mm front and 22mm rear + ASR for my EK and I found it fun to drive in Wakefield...with a bit of oversteer
I heard they don't make 26mm front for EG...and with 24/22, will that create too much oversteer?
24 front / 22 rear should be ok
EG hatch rear is light. Pretty Neutral
55EXX
15-07-2008, 08:54 PM
what about 24mm front (whiteline) and 24mm rear (asr bar and brace) in eg hatchie?
markoJEK1
15-07-2008, 08:58 PM
what about it rowan? same crap that yonas said , just bars a bit bigger, wont decrease its performance in any way, just increase it, if thats what you're asking
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.