EK VTI engine problem

[BlueSiR]

Hi everyone

i got problem with my ecu on my ek vti

would that occur any problem to my engine if i run the car with B16A ecu?

any help or suggestion would be great

thanks

[czy_sol87]

u mean ek vtir???
and im assuming u mean a first generation b16a ecu??

only issue i see is that the ek vtir is OBDII, and the first gen b16 ecu is OBD0 probly wont fit

[BlueSiR]

u mean ek vtir???
and im assuming u mean a first generation b16a ecu??

only issue i see is that the ek vtir is OBDII, and the first gen b16 ecu is OBD0 probly wont fit
The engine is on the eg sadan, so it's running OBD1 B16A ecu.

engine is EK VTI single cam vtec, ecu is EG B16a ecu

so would this occur any problem such as bearing or ......

[dahon]

EK Vti? coupe or sedan?
please give us an engine number.
d16y5,d16y8 or d16y1?
d16y1 was the engine found in the civic eg vti
d16y8 is the engine found in the ek vti coupe
d16y5 is the engine found in the ek vti sedan

manual or auto?

[BlueSiR]

no too sure where it
s 5 or 1 or8

but the engine is off ek vti sadan

[dahon]

vti sedan is a d16y5 man.
that operates differently... it runs vtec-e, not the other type of vtec.
u NEED the d16y5 ecu, cos vtec-e operates 12v and 16v,
also it takes different readings of the air fuel ratio etc etc...
not high lift cams like the y1 or 8...

[BlueSiR]

so if i run the engine with b16a ecu, what problems with it occur?

thanks

[dahon]

b16 is DOHC... runs differently brotha...
and b16 is the high lift vtec compared to vtec-e which runs 12v to 16v operation.
im sure u can find a d16y5 ecu in a wrecker somewhere...

[ECU-MAN]

you should get the P30 chiped with the P28 ROM