Hondata s200 DC2 (95 ODB1?) in EG GLI

[Migoreng_Noodles]

Is it possible to re-use a Hondata S200 ECU from a 95 AUDM Integra DC2, in a 94 EG Civic GLI with JDM B18CR Conversion?

(I'm just working out my budget, what parts I have, can re-use, etc.)

Thanks

[CRXer]

Is it possible to re-use a Hondata S200 ECU from a 95 AUDM Integra DC2, in a 94 EG Civic GLI with JDM B18CR Conversion?

(I'm just working out my budget, what parts I have, can re-use, etc.)

Thanks

Yes u can,u can use the ecu(alreaady socketed & configured for S200) & the external blue box,however,u'll have to get it retuned,ie another chip burnt.

[Migoreng_Noodles]

Re-tune will definitely be done.

Could I still drive it untuned without VTEC (ie. to the tuner..). Or should I get it towed there?

Will I have to use ODB2 to ODB1 conversion harness on the new engine to bring it back to ODB1?

[CRXer]

Just drive it there,it will be fine.

It depends how u do the wiring in your car with the new motor.
U wont need a conversion harness if u just use the EG wiring,because its already OBD1 at the ECU end.
There might need to be some reconfiguring at the shock tower plugs though,PM Benjammin and ask him how he wired his.