ITR swaybar in a VTI-R

[vuongkong]

hey guys, just wondering all the parts which are needed to fit an ITR swaybar into a Dc2 Vti-r. are there any better options ? thanks guys.

[riruiz_88]

1) 22 or 23mm sway bar
2) D brackets
3) D bushes
4) ASR sway bar reinforcement kit

you can use your current sway bar endlinks

[zco]

and grease.. to lube up the bushings

[T-onedc2]

1) 22 or 23mm sway bar
2) D brackets
3) D bushes
4) ASR sway bar reinforcement kit

you can use your current sway bar endlinks

as above, another reinforcement option is Beaks.

I have 23mm + Beaks on mine

[Limbo]

i'd stick with the ASR its a better unit.

You can get the whiteline bar also which isn't bad, just their re-enforcement is crap, but they can be adjusted

[riruiz_88]

and grease.. to lube up the bushings

i didnt think you would need grease if you were using OEM bushes, cause they rubber. you would need grease if they were polyurethane

[zco]

you need grease regardless

[bennjamin]

yup any swaybar rubber or poly bush needs grease of some sort in installation.

This is to prevent BINDING and aid in smooth operation.

For example i use GPG for OEM bushes ~ then make sure full movement + bind free then torque the swaybar mounting + endlinks on flat static ground.