B20

[Wace]

hey guyz
i have a vtir integra n i was just thinking bout putting a crv bottom end on it as i'v heard it'd gain allot of power
just wondering if its a good idea?
and how much would it gain?

[F.O.B Squad]

hey man you should pm z3lda, ask this person about getting a B20 bottom end as they got one for sale
http://www.ozhonda.com/forum/showthread.php?t=90775

[zco]

the amount of power you will gain depends on your mods, and if u want a simple or a built b20 motor

b20's is a good idea for a torque increase and increase in abit of power.. cheap and effective. if you want to buy a b20 motor, pm fatboyz39 or benson

[STOCK]

All other items remaining the same (exhaust,header,intake,cams,ecu etc), i doubt you will gain "allota" power.

[VTECMACHINE]

You'll gain alot more torque regardless of mods. But... it's not as easy as bolting on a CRV bottom end.

[fatboyz39]

Won't gain ALOT of power but you will gain something. Here is a little example.

Stock B18c7 I/H/E ECU tune 124kw atw 13.6@100MPH

Due to a rod bearing spun at a trackday we changed to a used prebuilt stock b20 bottom end.

So same head as the b18c7 with the same bolt-ons as above the car went 13.4@101MPH which made 121kw atw.

Both setup in the same car which was a DC2R.