PDA

View Full Version : wheels for FD


me_kevinly
02-06-2008, 09:13 PM
Hey guys,
i have a fd, just wondering,
do you guys think its ok to fit 18" x8 in front and 19x 8.5 in the rear.
dyljoy
02-06-2008, 10:10 PM
u may need spacer for fitment, i don't recon this way, try 18 x 7.5, best size for FD
Phlirt
02-06-2008, 10:17 PM
i think you will be fine. aslong as you have the right offset - i fit 20x8 on my car no problems. would depend on how low you want it to be etc but i dont the you would need spacers
me_kevinly
02-06-2008, 10:21 PM
im currently running on 18 x 7.5 all around
but i wanna change it to another set of wheels
just worry about the larger wheel in on the back.
or should i go 18 all around again....but if thats the case, then no pt changing i guess..
dyljoy
02-06-2008, 10:53 PM
maybe u can ask tyre-wheel workshop to get a idea for it!
dmx
03-06-2008, 04:23 PM
Hey guys,
i have a fd, just wondering,
do you guys think its ok to fit 18" x8 in front and 19x 8.5 in the rear.

18" or 19 or 20, not problems, you will get low profile tyre anyway, so overall diameter would be the same.
only width. but max front 8.5 and rear 9
fit ? depend the offset. the tyre shop will know which model fit, which not.
mine width 8" (front and rear), no probs at all (*only illegal issue here;))
HT06CIV
08-09-2008, 02:20 PM
hey mate,
im thinking of throwing 18x7.5 on mine, so i just want to ask if yours fit ok? is yours lowered at all?
cos i want to lowerer mine about an inch or so, and just dont want trouble with tyre rubbing etc..
cheers


im currently running on 18 x 7.5 all around
but i wanna change it to another set of wheels
just worry about the larger wheel in on the back.
or should i go 18 all around again....but if thats the case, then no pt changing i guess..
me_kevinly
08-09-2008, 04:56 PM
yeah its fine,
i dont have any problem with my car and its lowered
bodaas
08-09-2008, 07:39 PM
it wont be a problem, i fitted 20x8.5 to my fd atm

my friends fitted 20x8.5 and rear 20x9.5, it still alright

as long as you get the right offset
HT06CIV
09-09-2008, 08:31 AM
Sweet.. thanks for that mate..
you got any photos of your car with the 18" and lowered?
oh, and how much did u lower it?


yeah its fine,
i dont have any problem with my car and its lowered
denot
09-09-2008, 11:40 AM
for more info: http://www.ozhonda.com/forum/showthread.php?t=68099
me_kevinly
09-09-2008, 12:34 PM
Sweet.. thanks for that mate..
you got any photos of your car with the 18" and lowered?
oh, and how much did u lower it?

2" lowered
simon8855
09-09-2008, 01:45 PM
sorry to ask here in someone's thread
guys...will a 18'' x 7.5'' offset +48 fit 2008 FD? please help
rk 86 wa
09-09-2008, 02:56 PM
2" lowered



if you have lowered your car 2 inches and are thinking of 18x8, id reconsider

I have 18 x 7.5 with 225 / 40 / r 18 +40 offset, with ~2" lowering via coilovers and even with the damper settings maxed out i still got MASSIVE amounts of scrubbing. Only way i overcame this was to cut holes out of my fender liners and bend back the metal brackets for your liner clips.
bodaas
09-09-2008, 05:03 PM
if you have lowered your car 2 inches and are thinking of 18x8, id reconsider

I have 18 x 7.5 with 225 / 40 / r 18 +40 offset, with ~2" lowering via coilovers and even with the damper settings maxed out i still got MASSIVE amounts of scrubbing. Only way i overcame this was to cut holes out of my fender liners and bend back the metal brackets for your liner clips.

try higher offset,


sorry to ask here in someone's thread
guys...will a 18'' x 7.5'' offset +48 fit 2008 FD? please help

i reckon 18x7.5, you shouldnt have any problem at all, thats the standard rim size for fd2R

wrong offset that cause the problem

just buy spacer if it rubs inside the wheel arc, as far as i know civic fd fn best offset btween 42 to 45
me_kevinly
09-09-2008, 05:36 PM
sorry to ask here in someone's thread
guys...will a 18'' x 7.5'' offset +48 fit 2008 FD? please help

yes it will
me_kevinly
09-09-2008, 05:37 PM
im thinking of 19x8 offset 38
if so i will need to roll right?
bodaas
09-09-2008, 05:48 PM
the lower offset you go, your wheel will stick out further

38 offset, it looks like nissan or toyota wheel offset
me_kevinly
10-09-2008, 04:46 PM
the lower offset you go, your wheel will stick out further

38 offset, it looks like nissan or toyota wheel offset

yeah i know
thats why im thinking if i roll the guards
will it work out?
bodaas
10-09-2008, 08:42 PM
yeah i know
thats why im thinking if i roll the guards
will it work out?

the guy above me already said 18" rims 40 offset has problem

you have 19" with 38 offset, if i was you, i wouldnt get the rim at all
especially the front 19X8 with 38 offset, is your FD wide body?

anyway have you try fit the rims yet? and post the picture pls if you have
SaBReT00tH
11-09-2008, 05:17 PM
18" or 19 or 20, not problems, you will get low profile tyre anyway, so overall diameter would be the same.
only width. but max front 8.5 and rear 9
fit ? depend the offset. the tyre shop will know which model fit, which not.
mine width 8" (front and rear), no probs at all (*only illegal issue here;))

Wouldn't you have to pay to roll the guards if it's slightly lowered and you put 19 or 20s on? Also wouldn't the ride be HORRIBLE if stock was 15s? And bending a rim by going over a pothole is a likely occurance? as well as scrubbing DEFINITELY on 19s, let alone possibly with 18s too, even on a 7.5 width?