changing dc2r rear LCA to EK

[eight]

hi guys, can this be done with ease?

i'm looking to fit my coilovers from my EK

also are there any implications etc if this can be done

thanks in advance

[bennjamin]

NO it cannot be done.
Both LCA are different design , different length too.

EK = EK

DC2R = DC2R.

Dont swap them just to fit some DC2R coilovers to your EK...

[magicmike]

Sorry this is a bit off topic, but I didn't wanna make another thread

If I were to install dc2r lca's into my dc2, would i still be able to run my stock shocks and springs ? or would i have to change them to the dc2r ones ?

[Chi]

DC2R Rear LCA requires ball joint type shocks/coilovers.

DC2 VTiR requires Fork type shocks / Coilvers.

So in other words no, you cannot use your stock dc2 sussy with dc2r LCA.

[[ricer]]

Sorry this is a bit off topic, but I didn't wanna make another thread

If I were to install dc2r lca's into my dc2, would i still be able to run my stock shocks and springs ? or would i have to change them to the dc2r ones ?

dc2r and normal dc2 rear lca are different in the way the shocks mount to the lca
so you would have to run dc2r shocks with dc2r lcas

[magicmike]

Cheers guys :D

[z3lda]

hi guys, can this be done with ease?

i'm looking to fit my coilovers from my EK

also are there any implications etc if this can be done

thanks in advance

u can swap the fork type cup on your rear coilover to the ball joint type cup.

contact the manufacturer of your coilovers and ask them if they sell the cups.

[e240]

Change the DC2R LCA to an EG Fork Suspension Type LCA
You then need to machine/grind/file the middle bushing to suit the EK shock forks.

I run EK9 suspensions on my EG.

[EG5]

You can run DC2R / EG6 suspension on EK by only using function 7 rear lower control arm .