clutch for b16a turbo

[fatboyz39]

Whats a good cheap clutch to hold 150-170kw atw b16a turbo? Budget less then 300bucks.

[dsp26]

XTR or F1 Racing Stage 3 if you aint after the flywheel :D

whats that figure roughly at the crank ~220kw/295hp??

http://cgi.ebay.com/ebaymotors/XTR-STAGE-3-RACING-CLUTCH-92-05-CIVIC-93-95-DEL-SOL_W0QQcmdZViewItemQQcategoryZ33730QQihZ005QQitem Z150256156638
http://cgi.ebay.com/ebaymotors/F1-RACING-STAGE-3-CLUTCH-KIT-94-97-DEL-SOL-SI-VTEC-B16_W0QQcmdZViewItemQQcategoryZ33730QQihZ007QQitem Z170226875663QQrdZ1QQsspagenameZWDVW

***EDIT***
just noticed the F1 Racing has a higher threshold.. from memory it was like US$80 to ship just either a clutch or flywheel from these guys...
F1 is : Horsepower Rating: 320 HP / Torque Capacity: 278 ft/lbs

[EKVTIR-T]

ebay usa

[fatboyz39]

dsp26 have tried those clutches or any reviews?

[dsp26]

dsp26 have tried those clutches or any reviews?

i've got the xtr stage 3s with the flywheel... grips instantaneously regardless where in the rpm i dump it.. i've never felt it slip.. but then again i'm not running the power you are... very grippy for a sprung clutch.. so much that i get wheel hop instead on mild take off if i bog the car... the pressure plate is at least +20% clamp as well.. should be no probs on a hydro box.

stage2s are kinda week, got it to slip on the mrs relatively stock b18b


***EDIT***
lol let me know when i can pick up the valve springs and you can 'test' it out yourself...

[DLO01]

From the US.

http://www.competitionclutch.com/
or
http://www.clutchmasters.com/

:thumbsup:

[Weq]

the cheap action clutches will suit your goals. basically anythign with an uprated pressure plate. the clutch face (organise/composite or pucked) will determine most of the feel. And for your power goals, id say it would upto u completly as any will do the job.

[fatboyz39]

thankyou all. US EBAY FTW

[Limbo]

let me know how the clutch goes, might wanna upgrade my sports organic sometime downthe track

[040501912]

Dont get XTR i read on US forum they dont hold! the power that were stated. and really bad when they are hot!..

XTR pressure plate is just like a standard plate. not much different.

try to search for Clutch Master. or just get EXEDY Heavy dutty should be fine.

[EGB18CT]

what deno mentioned cc or clutch masters maybe ogura too

[Limbo]

what about this one
http://cgi.ebay.com/ebaymotors/F1-RACING-XTREME-STAGE-4-CLUTCH-99-00-CIVIC-SI-B16_W0QQcmdZViewItemQQcategoryZ33730QQihZ006QQitem Z160249742065

only $158 US

[dsp26]

^^^eeeep... i would never use an unsprung clutch unless it was a dedicated drag car.

[Limbo]

good point i didn't even notice until you said it

[Limbo]

hey this one is sprung

http://cgi.ebay.com/ebaymotors/F1-RACING-STAGE-3-CLUTCH-99-00-HONDA-CIVIC-SI-B16A2-JDM_W0QQcmdZViewItemQQcategoryZ33730QQihZ005QQitem Z150257964224

[paps02]

(noob question alert)

would the clutch that limbo has given the link to above (for a b-series) be ok for d-series?? that is a d16y8.

[Limbo]

No D series are are different. Goto that site and have a look at the store i beleive there are some for D series there

[90LAN]

just go to clutch shop and get it reclamped and new friction plate on
tell them how much power u are making and they should be able to help
a good old base clutch would be a itr one

[fatboyz39]

yeah thats what i might do Lan. Or ill go for teh exedy clutch range.

[paps02]

this seems like the one (for those of you playing at home)

http://cgi.ebay.com/ebaymotors/F1-RACING-STAGE-4-CLUTCH-92-05-CIVIC-93-95-DEL-SOL_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262 QQcategoryZ33730QQihZ007QQitemZ170230694702