HID HB4 kit

[TRUMAN]

hey guys just wondering if you've guys came along this problem where u see some connections that u think wont have any spot in the car.. ive just purchase a kit and i just want to see whether anyones come across these connections in the kit.. and would it be ok to not use this connection and leave it out.

http://i145.photobucket.com/albums/r227/truman295/P6170001.jpg

http://i145.photobucket.com/albums/r227/truman295/P6170003.jpg

hope u guys can help.
More pics of the kit
http://i145.photobucket.com/albums/r227/truman295/P6170001-1.jpg
http://i145.photobucket.com/albums/r227/truman295/P6170005.jpg
above is the wires coming from the bulb
http://i145.photobucket.com/albums/r227/truman295/P6170008.jpg
http://i145.photobucket.com/albums/r227/truman295/P6170013.jpg
this is the ballast so thats the whole kit in all the pics..

[bungsai]

looks like you have a kit (well loom at least) for H4 bulbs there sir.

Post pics of the bulbs.

The three prong plug is for one H4 connector.

Ther other little clip is for the switching mechanism on the bulb.

[TRUMAN]

pics of BULB added

[bungsai]

i think you have the right bulbs and the wrong loom.

You are sposed to be able to plug that three prong thing into your original wiring loom in your car. The hb4 prong is only twin pronged whilst that one you show is triple pronged (h4). The extra prong on the H4 kit is the on off switch for the high beam signal.

The extra plug that you cant identify is for the switching mechanism and delivers this extra on off signal to the bulb so that your high beams still work. Obviously as hb4 is low beam only, this isnt necessary, which leads me to believe you have the wrong loom.

[Bludger]

I think I know what the problem is.

the item inside the yellow circle is for the signal to power the HID kit, on and off

it should plug into your stock headlight sockets which plug into the original bulb

the problem is that they have given you a H4 socket, not a HB4

get back to the person who supplied it to you and kick their ass

[TRUMAN]

ohhh Poo!!

[TRUMAN]

ok.. so ive talked to the person who's sold me the HID.. and the Loom wasnt suppose to be in the kit.. so it was plug and play.. but it wont work? wats going on?? could it be a faulty Kit?

http://i62.photobucket.com/albums/h98/tegstar83/P1010047.jpg

this was how the kit suppose to look once all connected.. the loose bit connects to the oem harness of the DC2R.. and that was how i did it too.. and this was wat the seller sent me.. the installtion should look like that.

[Bludger]

ok.. so ive talked to the person who's sold me the HID.. and the Loom wasnt suppose to be in the kit.. so it was plug and play.. but it wont work? wats going on?? could it be a faulty Kit?

http://i62.photobucket.com/albums/h98/tegstar83/P1010047.jpg

this was how the kit suppose to look once all connected.. the loose bit connects to the oem harness of the DC2R.. and that was how i did it too.. and this was wat the seller sent me.. the installtion should look like that.If you have what is in that picture, you should have no problems

sort this out with the supplier

[iversonruls]

probably faulty kit...
did u hear any sound from the ballast when its switched on??

[Bludger]

probably faulty kit...
did u hear any sound from the ballast when its switched on??don't give him false information

he can't plug it in, how can he turn it on???

hes got a h4 plug, instead of a hb4

[TRUMAN]

If you have what is in that picture, you should have no problems

sort this out with the supplier

yea i did this setup on my car.. and nothing works.. no sound from ballast etc.. only lights that are workin are the parkers and high beam. =(

[Bludger]

yea i did this setup on my car.. and nothing works.. no sound from ballast etc.. only lights that are workin are the parkers and high beam. =(plz take actual pics of what you have actually done to your car, it will help us rectify your problems

[TRUMAN]

will be takin pics of actual setup on my car after dinner time and should be on after 9pm

[iversonruls]

don't give him false information

he can't plug it in, how can he turn it on???

hes got a h4 plug, instead of a hb4
he said he did the setup as shown in the pic -.-

should be able to plug in rite?

false info huh?

[TRUMAN]

lol.. theres no false info from u iversonruls lol... but heres the pic of my setup as like the pic i showed previously. its in three parts going up to the end of the ballast lol

http://i145.photobucket.com/albums/r227/truman295/part1.jpg

http://i145.photobucket.com/albums/r227/truman295/part2.jpg

http://i145.photobucket.com/albums/r227/truman295/part3.jpg

so chances of it being faulty kit? theres nothing wrong with the oem harness coz wen i put in back stock bulb it works fine =)

[iversonruls]

hmmm since a set of hid comes with 2 ballast n bulbs

hv u try the other 2?

[TRUMAN]

Nods his head.. yep tried both...

[iversonruls]

everything looks fine...
but weird.. both ballast faulty..hmmmm

are those 35w hids?

[TRUMAN]

yea theyre 35w.. soo if its likely to be faulty ill see if i can get an exhange

[bungsai]

are you 100% they are plugged in correctly

you really have to push the connecter from the ballast to the OEM plug really hard sometimes.

my old kit in my dc2 was a beyoch.

[TBS33N]

You have to have both sides hooked up otherwise their will not be a complete circuit! it happened to mine. as soon as i had both plugged in it worked.

[TRUMAN]

Both aLL in and still no work.. and i pushed all connectors in very very very hard.... and still no work.. =( and my fuse is ok.. works fine. fuse for the headlights

[TRUMAN]

tho would this kit still require a harness????

[TRUMAN]

ok guys, i mite try this setup with the harness that wrongly came with the kit... maybe this mite work.. here are the pic set up in order... hopefully its understandable.

http://i145.photobucket.com/albums/r227/truman295/part1-1.jpg
so circles there will be one part ground wire to chassis and other to oem harness. The X means im leaving out because if u look carefully the circle that will connect with the oem harness seems to be one same wire?

http://i145.photobucket.com/albums/r227/truman295/part2-1.jpg
this is just a continuation of the wiring , the X im leaving out because i dont tink i would have any use for it

http://i145.photobucket.com/albums/r227/truman295/part3-1.jpg
so this is the middle of the setup, circle will go to battery and the X is suppose to be the connecting thingy into the H4 harness??

http://i145.photobucket.com/albums/r227/truman295/part4.jpg
and this is the same as the left side of the setup, vice versa..

wat u guys think of this setup? i mite then work??? or maybe i just need to get a HB4 loom/harness from the seller?

[bungsai]

that kit should not require a loom.

if it doesnt work, dont mess with it

send it back and get a new one.

[lonelybutterfly]

check this out, it might help!!! good luck!!
http://www.offroaders.com/info/tech-corner/project-cj7/project-cj7-HID-Lightforce-install.htm