15 inch rota slipstream on dc2r

[vteccoupe]

as above, anyone using 15s slipstream on their dc2r? can it clear the calipers? :thumbsup:

[Zdster]

Right offset/width = why not?

[zco]

at 16x7 40+ it will clear stock calipers.. but not spoon ones :)

[dynosaur]

at 16x7 40+ it will clear stock calipers.. but not spoon ones :)

then what is the right offset to clear the spoon caliper ?

thanks

[vteccoupe]

at 16x7 40+ it will clear stock calipers.. but not spoon ones :)

hw abt 15x6.5 rota slipstream 5x114.3 ? should be able to clear stock calipers as well?

[votek]

what offset

[vteccoupe]

what offset

+40 offset

[jn093]

ok so I'm thinking of getting some desmond regamasters evo in 15x6.5+42. Will these clear stock dc2r calipers? Will be going on a civic with 5stud conversion,im 100% it will not fit spoon calipers from other sites but can't get a clear answer on will clear standard dc2r calipers. Any advice would be great. Thanks in advance

[rc_]

I've got the std vti-r rims (fat fives) 15x6 I think ET45 (i'm sure someone will correct if those specs are wrong)

They fit fine over upgraded 280mm rotors with type r calipers on dc2 (on original 4 stud 262mm rotor hubs).

Also my 15x6.5 et32 sprint harts clear no problems. You should be ok with most 15 inch rims with offsets between 30-45 I would think.

[rc_]

25370

25371

dc2, 4 stud vtir-r hubs with type r calipers and 280mm rotors. Photo's are with fat fives fitted.

Clearance on diameter approx 3-4mm
Clearance to spokes approx 10mm

[jn093]

Oh nice, thanks for the reply :) looks like 15x6.5+35-45 will clear no problems. Ill get the wheels and let you know how it goes. Thanks again for verifying

[rc_]

Should be fine as long as the rib on the I.D of the rim doesn't protrude in too much.

Good luck.