View Full Version : replacing dash glass (infront of speedo)
rnbguy
03-07-2008, 12:54 PM
Hi Guys,
Sorry if this isn't a great way of explaining this but I have a crack that's driving me nuts on the glass bit infront of the speedo in the dash, how do i remove that to replace it?
Thanks
CRXer
03-07-2008, 01:05 PM
its dead easy dude it just clips off once u remove the speedo cluster from the dash.
u will see what i mean when u get at it with a screw driver & get it out.
just post up a wanted to buy for a broken cluster unit,ive seen heaps of people looking for new ones lately,they gotta have their old broken one still lying around.
rnbguy
03-07-2008, 01:13 PM
i havent gotton anything off yet unfortunelty... where would i start?
CRXer
03-07-2008, 01:24 PM
looks like uve got EK written there.
have a look at the top of the plastic bezel/fascia surrounding the cluster & u will see 2 screws,take them out,then gently try pulling the plastic out,its also held by 2 clips on the bottom edge which will break if pulled on too hard at the wrong angle.
then u will see the cluster,another 2 screws on the top again & 2 screws on the bottom corners,pull out cluster & disconnct plugs from the back & its out.
rnbguy
04-07-2008, 12:13 PM
works thanx!!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.